Ether IO24 DIP R

NOTICE: EOL Notification for Ether IO24 R and Dip R

The Ether I/O 24 DIP R is a UDP/IP controlled Digital Input/Output module. The module features three 8-bit ports with 5V level signal lines. Each of the 24 lines can be independently programmed as either an input or output.

The module connects to any Ethernet network supporting the UDP/IP protocol suite and can communicate with any point on that network. By connection with an Internet Router, the device can communicate with any Internet-connected device

Ether IO24 R Test and Programming Utility

BOARD FEATURES:

• Ethernet to Digital I/O Interface
• 24 independently programmable signal lines with configurable CMOS, TTL or Schmitt Trigger thresholds and programmable pull-ups per line
• Supports UDP Commands, ARP, BOOTP, DHCP, ICMP
• SPI and I2C Interface on all three Ports
• Power-up Settings are stored on-board for easy configuration
• Programmable Fixed IP or Dynamic IP assignment from a DHCP server
• 50-pin Dual In-Line Package Ideal for prototyping
• The compact module Fits into a standard 50-pin 900mil IC Socket (69mm x 25.2mm x 21mm)
• Can be connected to a wireless network gateway or access point for wireless operation
• Advanced configuration allows the modules to automatically scan the input ports and transmit changes directly to any host or another Ether IO24 module without a host connection.
• Integrated Switch Mode Voltage Regulator allows power from any 8-32V DC Power source.
• RoHS Compliant

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angles and display monitors.