10g Syringe Silicone Heatsink Thermal Paste Compound
10g Syringe Silicone Heatsink Thermal Paste Compound. High-quality heat transfer compound. Used to thermally connect a device to a heatsink to aid heat transfer.
1 in stock
![10g Syringe CPU Silicone Heatsink Thermal Paste Compound](https://temperosystems.com.au/wp-content/uploads/2020/10/10g-Syringe-Silicone-Heatsink-Thermal-Paste-Compound-300x300.jpg)
1 in stock
Description Thermal Paste Compound
10g Syringe Silicone Heatsink Thermal Paste Compound
- 10g Syringe
- Colour: White
- Carrier: Silicone
- Thermo Conductive ingredient: metal oxide
- Odour: none
- Thermal conductivity: 0.9W / mK
- Thermal resistance: 0.12ºC – cm2/W
- Dielectric breakdown: 18Kv / mm
- Electrical resistance: 3 x 1014Ω
- Recommended coating thickness: 0.15-0.35mm
- Viscosity: 1200 KcP
- Density: 2.2g / cm3
- Temperature range: -50 -200ºC
Development Resources: demo codes, schematics, datasheets, etc
Reference for Arduino and reference to all matters
Notes:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angle and display monitor.
What is a thermal paste made of?
Its use is necessary on CPUs since they are very inefficient components and dissipate a lot of energy in unused heat. This paste is usually made of zinc oxide and silicone and it is characterized by high thermal conductivity. There are also products with liquid metal that have a higher thermal conductivity.
How-to apply thermal compound from ASUS North America
This is exactly as it sounds.
Apply a thin line of thermal paste directly down the centre of the IHS (Integrated Heat Spreader) and then allow the pressure of the CPU cooler to spread the paste as you secure it
Other Related Products
WS2812B Addressable RGB 5050SMD LED Chips Pixel on White Heat Sink PCB 5V
Weight | 0.015 kg |
---|---|
Dimensions | 23 × 9 × 2 cm |