MQ-5 Natural gas LPG Sensor Module
MQ-5 gas sensor has high sensitivity to Methane, Propane and Butane, and could be used to detect both Methane and Propane. The sensor could be used to detect different combustible…
MQ-5 gas sensor has high sensitivity to Methane, Propane and Butane, and could be used to detect both Methane and Propane. The sensor could be used to detect different combustible…
This module is made using Alcohol Gas Sensor MQ3. It is a low-cost semiconductor sensor that can detect the presence of alcohol gases at concentrations from 0.05 mg/L to 10 mg/L. The sensitive material…
This device allows you to configure the component as a switch. It can be used for the purpose of detecting vibration or applied for detecting tilt in a specified mechanical…
It integrates a 4 pin connector which can be easily connected to a sensor shield with the jumper cable with headers included.
DHT11 is a compound digital temperature and humidity sensor that outputs calibrated digital signals. Thanks to the dedicated digital module acquisition technology and temperature and humidity sensing technology applied to…
DHT11 detects water vapour by measuring the electrical resistance between two electrodes. The humidity sensing component is a moisture holding substrate with electrodes applied to the surface. When water vapour…
LM35 series are precision integrated-circuit temperature devices with an output voltage linearly proportional to the Centigrade temperature. The low-output impedance, linear output, and precise inherent calibration of the LM35 device…
Thermistors are one of the most accurate types of temperature sensors. OMEGA thermistors have an accuracy of ±0.1°C or ±0.2°C depending on the particular temperature sensor model. However, these elements…
The DS18B20Â temperature probe is a one-wire digital temperature sensor. This means that it just requires one data line (and GND) to communicate with the Arduino.