1.3inch IPS full TFT LCD colour module SPI serial port HD 240 x 240

Features 1.3inch IPS full TFT LCD colour module SPI serial port HD 240 x 240

• SIZE 1.3inch
• Display Mode Normally black IPS
• Display Format Graphic 240 RGB x 240 Dot-matrix
• Input Data SPI interface
• Drive IC ST7789VW
• Dimensional outline 27.78(W) x 39.22 (H) x 3.0+/-0.1(T)mm
• Resolution 240RGB x 240 Dots
• LCD Active area 23.4 (W) x 23.4 (H)
• Dot pitch 0.0975(H) x 0.0975(V) mm
• Viewing Direction All View
• Operating Temperature -20～70°C

Pin Descriptions: 1.3inch IPS full TFT LCD colour module SPI serial port HD 240 x 240

• PIN No Symbol Description
• 1 GND Ground
• 2 VCC Power 3.3V
• 3 SCL Serial clock pin.
• 4 SDA Serial data input
• 5 RES LCM Reset pin This pin is reset signal input.
• 6 DC Data/Command Control
• 7 CS Chip Select
• 8 BLK Backlight control pin

Interfacing Arduino with ST7789 TFT Display – Graphics Test Example

This Arduino tutorial shows how to interface the UNO board with the ST7789 TFT display.

The ST7789 TFT module contains a display controller with the same name: ST7789. It’s a colour display that uses SPI interface protocol and requires 3, 4 or 5 control pins, it’s low cost and easy to use. This display is an IPS display, it comes in different sizes (1.3″, 1.54″ …) but all of them should have the same resolution of 240×240 pixel, which means it has 57600 pixels. This module works with 3.3V only and it doesn’t support 5V (not 5V tolerant).

Product Documentation links below

• 1.3inch 4-lin4-SPI_IPS Module User Manual
• Driver IC ST7789 Datasheet

Program Download links below

• 1.3inch 4-lin4-SPI_IPS Module Package

Reference Materials links below

• STM32 Keil software use illustration
• IAR_IDE and MspFet software use illustration
• PCtoLCD2002 software use illustration
• Image2Lcd software use illustration

Common Software links below

PCtoLCD2002

Image2Lcd

Other Related Products

Static Shielding Bag-with Zip, metal-in