1S BMS 3.7V PCB Protection Circuit Board 3 to 6 MOS

1S BMS 3.7V PCB Protection Circuit Board are a single-cell charger/protection circuit that can be used to charge a single cell of 15 Amp

you can use the BMS for li-ion 18650 or other batteries without balancing function

Features:

1. High-accuracy voltage detection circuit;
2. Terminal of the charger using high voltage device;
3. Built-in three-stage over-current detection circuit(over-current 1over-current 2,load short circuit);
4. MOS transistor can control the battery charge and discharge.

Specification:

3MOS

• Overcharge detection voltage: 4.25 + 0.05V
• Overcharge disconnection voltage: 4.23 + 0.05V
• Over-discharge voltage:2.45 + 0.1v
• Charging voltage: 4.2 V
• Sustained current: 6 A
• Overcurrent Discharging current: 7.5 A
• Operating Temperature : -40-+85
• IC components: DW01 + 8205
• Product size: 35*7.4*2 MM

4MOS

• Over charge detection voltage: 4.25 + 0.05V
• Over charge disconnection voltage: 4.23 + 0.05V
• Over-discharge voltage:2.45 + 0.1v
• Charging voltage: 4.2 V
• Sustained current: 7.5A
• Overcurrent Discharging current: 10A
• Operating Temperature : -40-+85
• IC components: DW01 + 8205
• Product size: 35*7.4*2 MM

6MOS

• Overcharge detection voltage: 4.25 + 0.05V
• Overcharge disconnection voltage: 4.23 + 0.05V
• Over-discharge voltage:2.45 + 0.1v
• Charging voltage: 4.2 V
• Sustained current: 12A
• Overcurrent Discharging current: 15A
• Operating Temperature : -40-+85
• IC components: DW01 + 8205
• Product size: 35*7.4*2 MM

Wiring instructions:

1. B+ battery is positive.
2. B- battery negative.
3. P+ outputs the positive input for the battery pack.
4. P- outputs the negative electrode for the battery pa

Package Included

1 x 1S BMS 3.7V PCB Protection Circuit Board For Lithium-ion Battery Cell

Development  Resources: demo codes, schematics, datasheets, etc

Reference for Stackable Header Arduino shields Pins Starter Kit

Pin header from Wikipedia

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angles and display monitors.
3. Product Images are shown for illustrative purposes only and may differ in colour from the actual product.