.  . Battery Management System (BMS), Power Control . 4S 15A BMS 18650 Li-ion Lithium Battery 4 Leaf

4S 15A BMS 18650 Li-ion Lithium Battery 4 Leaf

$8.95 (AUD)

This BMS Board protects four lithium batteries connected in series from overcharging, over-discharging, overcurrent, and short-circuit. 14.8V battery pack rated voltage, 16.8V battery pack full charge voltage, and 14.4V battery pack rated voltage.

16 in stock

Qty Discount
2 - 4 5%
5 - 9 8%
10 + 10%
SKU: TS-P649 Categories: ,

Recommended and Related Products.

DC-DC boost conversion power 1.5 to 4.2v to 5v boost
$2.95 (AUD) Add to Cart
14 in stock
Sony | Murata VTC6 18650 3000mAh Battery – Button Top
$11.95 (AUD) Add to Cart
0 in stock
Panasonic NCR18650-B 3400mAh 10A Battery – Button Top
$12.95 (AUD) Add to Cart
13 in stock
Li-ion Battery Charger Protection Module 1S 2A
$3.25 (AUD) Add to Cart
19 in stock


We Ship World Wide We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company.

Calculate Shipping - shipping options and estimates can be found in your shopping cart.

4S 15A BMS 18650 Li-ion Lithium Battery 4 Leaf protection device and charge balancer for lithium elements of type 18650 is essential for safely charging lithium-ion elements.

The model in question can manage and stabilize the charge of a group of 4 cells; monitors the individual voltage of the cells by limiting the current in the element to a charge level higher than another, allowing the perfect balance of the voltages of the individual elements and interrupting the flow of current during the fault conditions, overheating and short circuit.

Specifically for robotic applications and devices in general, which require an accumulating battery with critical operating current.

SPECIFICATIONS:
  • Overload protection: 4.25 ± 0.025V
  • Over-discharge protection: 2.70 ± 0.025V
  • Overcurrent recovery conditions: charge recovery or disconnect load
  • Short-circuit recovery conditions: charge recovery or disconnect load
  • Continuous working current: 15A
  • Maximum charging current: 10A
  • Maximum discharge current: 40A
  • Working power consumption: ≤20uA
  • Main circuit conduction internal resistance: ≤15mΩ
  • Operating temperature: -40 ~ + 85 ° C
  • Lifetime:> 30000 hours
  • Dimensions: 36x36x3 mm

BMS solder instruction:

  • B+ connected battery is positive.
  • B1 is the connecting point between battery one and battery 2.
  • B2 connects the point between battery2 and battery 3.
  • B3 Connect the point between battery three and battery 4.
  • B- connect to battery negative end.
  • P- + connection charge / discharge positive.
  • P- connection charge / discharge negative.

1 x Package Contains: 4S 15A BMS 18650 Li-ion Lithium Battery 4 Leaf

Check out our On Sale and Clearance Items 

Development  Resources: demo codes, schematics, datasheets, etc

YouTube  Li-ion vs LiFePO4 Batteries: Advantages and Disadvantages

Wiki: List of battery sizes

     Hackaday serves up Fresh Hacks Every Day from around the Internet.


Instructables is a community for people who like to make things. Explore, share, and do your next project with us!

 

     Where the world builds software

    Raspberry Pi Foundation What would you like to make today?

    Arduino‘s mission is to enable anyone to enhance their lives through accessible electronics and digital technologies.


Wikipedia is a free online encyclopedia created and edited by volunteers worldwide and hosted by the Wikimedia Foundation.

 

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angles and display monitors.

Weight 004 kg
Dimensions 6 × 9 × .5 cm

Product Applications

4S Li-ion18650,LiCoO2,LiMn2O4,Li(NiCoMn)O2 rechargeable batteries 4S Lipo rechargeable batteries

We Customize Just for You!!

Tempero Systems offers many custom IoT electronic design services to help tailor our product to your exact needs. Whether you are looking for custom firmware, circuit board modifications, metal enclosures, or industrial color printing, we can help you with a wide variety of design services.


Product Reviews and FAQ's

Please login or register to ask a question. Thanks

Post Your Question

×

* All questions and comments are approved by a system administrator before re-posting to our FAQ product sections.