7-Bit WS2812 5050 RGB LED Ring 11.5mm
The LED is “chained” by connecting one gem’s output to another gem’s input. There is a data line with a very time-specific protocol. Because the protocol is very time-sensitive, it requires a real-time spinner such as AVR, Arduino, PIC
13 in stock
13 in stock
Description:
7-Bit WS2812 5050 RGB LED Ring 11.5mm is split; half is RGB, you know, and love and the other half is a white LED with a yellow phosphor. Without highlights, it is like a yolk. Light up These are very bright (like my eyes hurt) and can control 8-bit PWM per channel (8 x 4 channels = 32-bit colour overall). Perfect for adding a ton of colour + white dots to your project. We have seven compact 5050 (5mm x 5mm) Smart RGBW LEDs mounted on a beautiful round PCB with mounting holes and a linkable design to create our most elegant (suitable for evening wear) panels. Only use one microcontroller pin to control as many links as possible! Since the driver chip is located inside the LED, you can address each LED. Each has ~ 18mA constant current drive, so even if the voltage changes, the colour will be very consistent, with no external resistor, so the design is slimmer. The whole thing is powered by 5VDC (4-7V working), and you’re ready for rock.
Because the protocol is very time-sensitive, it requires a real-time spinner such as AVR, Arduino, PIC, embedding and more. You can not use this on Linux product information.
Features:
● Intelligent reverse polarity protection and power supply reverse polarity will not damage the IC.
● IC control circuit and power LED spotlight utility.
● Control circuit chip with RGB components in a package in 5050 to form complete external control pixels.
● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate.
● Built-in power-on reset and brown-out reset circuit.
● trichromatic colour of each pixel can realize 256 highlighted, complete 16777216 colours of all accurate colour display, the scanning frequency are not less than 400Hz / s.
● serial cascade interface, through a signal line to complete the receiving and decoding of data.
● transfer transmission distance between any two points in less than 5 meters without additional circuitry.
● When the refresh rate is 30 frames/sec, the cascading number is not less than 1024 points.
● data transmission speeds of up to 800Kbps.
● The colour of the light is highly consistent and cost-effective. With Integrated Drivers For Arduino Reverse Polarity Protection IC Control.
Package included: 1x 7-Bit WS2812 5050 RGB LED Ring 11.5mm
Check out our On Sale and Clearance Items
Development Resources: demo codes, schematics, datasheets, etc
Hackaday serves up Fresh Hacks Every Day from around the Internet.
Instructables is a community for people who like to make things. Explore, share, and do your next project with us!
Where the world builds software
Raspberry Pi Foundation What would you like to make today?
Arduino‘s mission is to enable anyone to enhance their lives through accessible electronics and digital technologies.
Wikipedia is a free online encyclopedia created and edited by volunteers worldwide and hosted by the Wikimedia Foundation.
Notes:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angles and display monitors.
Weight | .019 kg |
---|---|
Dimensions | 3 × 3 × .05 cm |