ADS1115 ADC16Bit 4 Channel with Programmable Gain Amplifier

The chip’s fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. So you can have up to 4 ADS1115’s connected on a single 2-wire I2C bus for 16 single-ended inputs.

$4.99

25 in stock

Add to Wishlist
This item: ADS1115 ADC16Bit 4 Channel with Programmable Gain Amplifier

25 in stock

$4.99
$4.99
$8.95
AT24C08 Serial EEPROM IIC Interface
$3.95
$6.95
Qty Discount
2 - 4 5%
5 - 9 6.5%
10 + 8%
SKU: TS-P297
Description
Additional information
Applications
Support & Utility
Q & A

ADS1115 ADC 16 bit Gain Amplifier based ADC module is perfect for microcontrollers without an analogue-to-digital converter or when you want a higher-precision ADC.

The module provides 16-bit precision at 860 samples/second over I2C (2 Wire Bus). The onboard ADS1115 can be configured as 4 single-ended input channels, or two differential channels and includes a programmable gain amplifier (up to x16), to help when measuring smaller single/differential signals.

The ADS1115 is very popular as it can run from 2V to 5.5V power/logic, can measure a large range of signals and it’s super easy to use. It is a great general-purpose 16-bit converter for any microcontroller project that has I2C capability including Arduino, Raspberry Pi, and ESP8266 based boards.

Features
  • Interface Type: I2C
  • Channels: 4 Channel AN0 AN1 AN2 AN3 or 2 differential inputs
  • Input voltage: 2.0-5.5v
  • Channel input voltage:0-VDD
  • Continuous Mode: Only 150μA
  • Single-Shot Mode: Auto Shut-Down
  • PROGRAMMABLE DATA RATE:8sps-860sps
  • Input range programmed control, 7 types input ranges:
  • -0.256V ~ + 0.256V, -0.512V ~ + 0.512V, -1.024V ~ + 1.024V,
  • -2.048V ~ + 2.048V, -4.096V ~ + 4.096 V, -6.144V ~ + 6.144V
  • I2C 7-bit addresses between 0x48-0x4B
Package includes:

1 x ADS1115 ADC Gain Amplifier 1x 10pin

Development  Resources: demo codes, schematics, datasheets, etc

YouTube: 16 Bit I2C 4 CH ADS1115 Module

Notes:
1. There may be slight size deviations due to manual measurement, different measuring methods, and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angles, and display monitors.

Related Products: 

STM32 ARM Blue pill board
STM32F103C8T6 Blue Pill is a development board based on ST Microelectronics’ STM32F103C9T6 microcontroller that has an ARM Cortex-M3 core that runs at 72MHz max. Software libraries are available that allow users to program the chip using the Arduino IDE.
Weight .005 kg
Dimensions 3 × 1.5 × .5 cm


Product Applications

  • Portable instrumentation
  • Consumer goods
  • Battery monitoring
  • Temperature measurement
  • Factory automation and process controls

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information: