* All questions and comments are approved by a system administrator before re-posting to our FAQ product sections.
$4.95 (AUD)
USB to TTL downloader can be used as a serial communication, a single-chip downloader, The Downloader has a USB interface, which can easily extend the Download line
![]() |
PL2303 USB to TTL Serial UART RS232 Adaptor
$5.45 (AUD) Add to Cart |
14 in stock | ||
![]() |
Pro Micro Leonardo – 5V/16MHz -micro-USB
$12.95 (AUD) Add to Cart |
5 in stock | ||
![]() |
MEGA+WiFi R3 ATmega2560+ESP8266, flash 32MB, USB-TTL CH340G, Micro-USB
$32.95 (AUD) Add to Cart |
3 in stock |
Calculate Shipping - shipping options and estimates can be found in your shopping cart.
mteiCH340E MSOP10 USB to TTL moduleCH340E MSOP10 USB to TTL moduleCH340E MSOP10 USB to TTL module CH340E MSOP10 USB TTL module can be used as serial communication, a single-chip downloader, an STM32 downloader, a route download, etc. The downloader has a USB interface, which can easily extend the download line, and at the same time, reserve a pin header interface to facilitate short-distance Download and connection
Download Mode:
STC Microcontroller
1) Wiring as follows: (only need to connect three wires)
TXD Terminal of USB Downloader -> connect single chip Microcomputer P3.0 (RX)
RXD end of USB downloader -> connect single chip microcomputer P3.1 (TX)
GND end of USB downloader -> connect single chip GND
2) The development board or small system uses a separate power supply. After connecting the cable, it will be found that even if the development board switch is turned off, the power indicator of the development board will be lit (weak). This is a normal phenomenon, or Download the STC according to the serial port—series MCU method Download (power supply must be cold start once).
STM32 Microcontroller :
1) Wiring is as follows: (only need to connect three wires)
TXD terminal of USB downloader -> connect single chip microcomputer PA10 (RX1)
RXD end of USB downloader -> connect single chip microcomputer PA9 (TX1)
GND end of USB downloader -> connect single chip GND
2) A separate power source powers the development board or undersized system. Or use the USB Downloader to provide a 5V power supply. In the Download, you need to connect boot0 to VCC. After Downloading, connect it to GND and press the reset button to complete the operation.
Check out our On Sale and Clearance Items
Hackaday serves up Fresh Hacks Every Day from around the Internet.
Instructables is a community for people who like to make things. Explore, share, and do your next project with us!
Where the world builds software
Raspberry Pi Foundation What would you like to make today?
Arduino‘s mission is to enable anyone to enhance their lives through accessible electronics and digital technologies.
Wikipedia is a free online encyclopedia created and edited by volunteers worldwide and hosted by the Wikimedia Foundation.
Notes:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different Photographing lights, angles and display monitors.
.
Weight | 0.008 kg |
---|---|
Dimensions | 6 × 2 × 1.5 cm |
Tempero Systems offers many custom IoT electronic design services to help tailor our product to your exact needs. Whether you are looking for custom firmware, circuit board modifications, metal enclosures, or industrial color printing, we can help you with a wide variety of design services.
Please login or register to ask a question. Thanks
* All questions and comments are approved by a system administrator before re-posting to our FAQ product sections.