.  . 3D Printer Parts, Step Motor Drivers, Stepper Motor . DVR8825 Stepper Motor Driver

DVR8825 Stepper Motor Driver

$5.95 (AUD)

Stepper motor driver, suitable for 3D printer controllers such as 3D MKS Gen v1.4 and many others. New model optimized to manage motors with working currents up to 2.5A.

30 in stock

Qty Discount
2 + 5%
5 + 10%
SKU: TS-P272 Categories: , ,

Recommended and Related Products.

Maker Pi RP2040: Simplifying Robotics with Raspberry Pi® RP2040
$21.95 $20.25 (AUD) Add to Cart
15 in stock
Maker Drive: Simplifying H-Bridge Motor Driver for Beginner
$11.95 (AUD) Add to Cart
3 in stock
ULN2003 stepper motor driver board
$2.95 (AUD) Add to Cart
17 in stock
L293D Motor Drive Shield Expansion Board Mega2560 UNO R3
$8.95 (AUD) Add to Cart
5 in stock


We Ship World Wide We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company.

Calculate Shipping - shipping options and estimates can be found in your shopping cart.

DVR8825 Stepper Motor Driver is a breakout board for TI’s DRV8825 micro-stepping bipolar stepper motor driver.

The DRV8825 features adjustable current limiting, overcurrent and overtemperature protection, and six micro-step resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).

Description:
The Module has an interface pinout that is almost the same as the DVR8825 stepper motor driver carrier so that it can be used as a higher performance in a pull-down menu the plates replaced in many applications.
Features:
  • Simple step and direction control interface
  • Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
  • Can interface directly with 3.3 V and 5 V systems
  • Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
  • Short-to-ground and shorted-load protection
  • 4-layer, 2 oz copper PCB for improved heat dissipation
  • Exposed solderable ground pad below the driver IC on the bottom of the PCB
  • Module size, pinout, and interface match those of our A4988 stepper motor driver carriers in most respects (see the bottom of this page for more information)
  • Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
  • Intelligent chopping control that automatically selects the correct, current decay mode (fast decay or slow decay)
  • 45 V maximum supply voltage
  • Built-in regulator (no external logic voltage supply needed)
Adjustable current control supports you to set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates.
Intelligent chopping control automatically selects the correct current decay mode (fast decay or slow decay).

Development  Resources: demo codes, schematics, datasheets, etc

Youtube: A4988 VS TMC2100 VS TMC2208

instructables.com/circuits/ Drive a Stepper Motor With an Arduino

 

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods, and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angles, and display monitors.

High Torque Stepper Motor

Weight 0.005 kg
Dimensions 5 × 5 × 1.5 cm

Product Applications

We Customize Just for You!!

Tempero Systems offers many custom IoT electronic design services to help tailor our product to your exact needs. Whether you are looking for custom firmware, circuit board modifications, metal enclosures, or industrial color printing, we can help you with a wide variety of design services.