ESP32-CAM Development Board + OV2640 Camera Module
The ESP32-CAM is a development board with WiFi and Bluetooth which integrates directly with the supplied OV2640 camera module.
5 in stock
5 in stock
SPECIFICATION:
ESP32-CAM Development Board + OV2640 Camera Module
- SPI Flash: default 32Mbit
- RAM: built – in 520 KB + external 4MP SRAM
- Dimension: 27 x 40.5 x 4.5(±0.2)mm/1.06×1.59×0.18”
- Bluetooth: Bluetooth 4.2 BR/EDR and BLE standards
- Wi-Fi: 802.11b/g/n/e/i
- Support Interface: UART, SPI, I2C, PWM
- Support TF card: maximum support 4G
- IO port: 9
- Serial Port Baud-rate: Default 115200 bps
- Image Output Format: JPEG( OV2640 support only ), BMP, GRAYSCALE
- Spectrum Range: 2412 ~ 2484 MHz
- Antenna: onboard PCB antenna, gain 2dBi
- 802.11b: 17±2 dBm (@11Mbps);
- 802.11g: 14±2 dBm (@54Mbps);
- 802.11n: 13±2 dBm (@MCS7)
- CCK, 1 Mbps : -90 dBm;
- CCK, 11 Mbps: – 85 dBm;
- 6 Mbps (1/2 BPSK): – 88 dBm;
- 54 Mbps (3/4 64-QAM): -70 dBm;
- MCS7 (65 Mbps, 72.2 Mbps): -67 dBm
- Turn off the flash: 180mA @ 5V
- Turn on the flash and adjust the brightness to the maximum: 310mA@5V
- Deep-sleep: the lowest power consumption can reach 6mA@5V
- Modern-sleep: up to 20mA@5V
- Light-sleep: up to 6.7mA@5V
- Security: WPA/WPA2/WPA2-Enterprise/WPS
- Power supply range: 5V
- Operating temperature: -20 °C ~ 85 °C
- Storage environment: -40 °C ~ 90 °C, < 90%RH
- Weight: 9g
Features
ESP32-CAM Development Board + OV2640 Camera Module
- Up to 160 MHz clock speed, Summary computing power up to 600 DMIPS
- Supports UART/SPI/I2C/PWM/ADC/DAC
- Support OV2640 and OV7670 cameras, Built-in Flash lamp.
- Built-in 520 KB SRAM, external 4MPSRAM
- Support image WiFI upload
- Support TF card
- Supports multiple sleep modes.
- Embedded Lwip and Free RTOS
- Supports STA/AP/STA + AP operation mode
- Support Smart Config and AirKiss technology
- Support for serial port local and remote firmware upgrades (FOTA)
Development Resources: demo codes, schematics, datasheets, etc
Reference for Arduino and reference to all matters.
Notes:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angle and display monitor.
Other Related Products
Components Package Kit for Arduino – 06
Components Package Kit for Arduino A low-cost components starter kit which comprises the most commonly used resistor values, potentiometers, switches, LED’s and Header terminal strips
Weight | 0.010 kg |
---|---|
Dimensions | 5 × 3 × 1.1 cm |
Product Applications
The board features onboard antennas and cores based on ESP32 chips which allow for the board to operate independently if required.
With integrated WiFi, traditional Bluetooth and BLE beacon with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, a main frequency adjustment range of 80 MHz to 240 MHz and on-chip sensors consisting of a hall sensor and temperature sensor.