GY-25 MPU-6050 Three-axis accelerometer and gyroscope module

GY-25 MPU-6050 Three-axis accelerometer and gyroscope module[3V-5V] is a high-resolution tilt angle (YAW, ROLL, and PITCH) sensor module based on an MPU6050 MotionTracking chip and an MCU chip.

The MPU-60X0 series chips are small motion-tracking chips that integrate a tri-axis gyroscope, tri-axis accelerometer, a Digital Motion Processor™ (DMP) and two sets of three 16bits-ADC for converting the tri-axis gyroscope and tri-axis accelerometer analogue output to digital signals.

Also, it can receive three external sensor signals from a compass via its dedicated I²C sensor bus to achieve 9DOF data. (a complete 9-axis MotionFusion™ output).

This chip series is so designed that it can interface with several non-inertial digital detectors such as pressure sensors through the auxiliary I²C port. The motion tracking chip can develop phones and tablets into powerful 3D smart devices to utilize in health monitoring, sport, fitness monitoring, and similar location-based services applications

Features:

• Model: GY-25
• Use chip: MCU + MPU6050
• Power supply: 3-5v (internal low dropout voltage regulation)
• Communication method: serial communication (baud rate 9600, 115200), IIC communication (only read raw data)
• Lead pitch 2.54mm
• Direct data: YAW ROLL PITCH
• Heading Angle (YAW) ± 180 °
• Rolling angle (ROLL) ± 180 °
• Pitch angle (PITCH) ± 180 ° (± 90 ° + ± 90 °)
• Angular resolution 0.01 °
• Module size: 15.5mm X 11.5mm

Package Included:

• 1 x GY-25 MPU-6050 Three-axis accelerometer and gyroscope

Development  Resources: demo codes, schematics, datasheets, etc

Reference for Arduino and reference to all matters

Ardunio from Wikipedia

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angles and display monitors.