.  . Multimeter, Tools . LCR-T4 MEGA428 Component tester ESR meter LCD display

LCR-T4 MEGA428 Component tester ESR meter LCD display

$19.95 (AUD)

Sorry!... this product is currently out of stock please contact us for updates on availability. Or see below if we may have "discontiued" this product.

LCR-T4 MEGA428 Component tester ESR meter LCD display

A great overall tester for many of your common components. The chip is a Atmega328.128mm x 64mm big Backlight LCD display with only a 2mA when on standby.

Qty Discount
2 - 4 5%
5 - 9 8%
10 + 10%
SKU: OKY2030 Categories: , Tag:

Recommended and Related Products.

Clear Acrylic Case Shell Housing For LCR-T4
$6.95 (AUD) Add to Cart
3 in stock


We Ship World Wide We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company.

Calculate Shipping - shipping options and estimates can be found in your shopping cart.

LCR-T4 MEGA428 Component tester ESR meter LCD display

Operation:

  • The meter measures the voltage across and the current through the DUT.
  • From the ratio of these the meter can determine the magnitude of the impedance. In combination with the impedance.
  • The equivalent capacitance or inductance, and resistance, of the DUT can be calculated and displayed.
  • All real capacitors have a little inductance, a little resistance, and some defects causing inefficiency.
  • The most useful assumption, and the one usually adopted, is that LR measurements have the elements in series and that CR measurements have the elements in parallel.
  • Handheld LCR meters typically have selectable test frequencies of 100 Hz, 120 Hz, 1 kHz, 10 kHz, and 100 kHz for top end meters.
  • The display resolution and measurement range capability will typically change with the applied test frequency since the circuitry is more sensitive or less for a given component

Specifications:

  • Supply Voltage: DC9V
  • Resistance Measurement Resolution: 0.1 ohm
  • Maximum Measurement Value: 50M ohm
  • Work Temperature: -25℃~85℃
  • Work Humidity: 5%~95%RH
  • Size: 86*60.5*18.5mm
  • Resistor: 0.1ω-50Mω
  • Capacitor: 25pF-100000uF
  • Inductance: 0.01mH – 20H
  • Standby current: 0.02uA
  • Operating current: 25mA

Package: 1pcs LCR-T4 Transistor Tester

Note Uses a standard 9V battery (Not included).

Reference

General Information on LCR Meters

Other Related Products

Clear Acrylic Case Shell Housing                 Tinned Light Duty Hook Up Cable 7/0.16 11 Colour’s (Per Meter)

 

Clear Acrylic Case Shell Housing For LCR-T4 Transistor Tester ESR                                                                 Tinned Light Duty Hook Up Cable

 

Weight 0.046 kg
Dimensions 7 × 6.5 × 1.8 cm

Product Applications

LCR-T4 MEGA428 Component tester ESR meter LCD display

  • LCD12864 large screen display
  • Support boot voltage detection function
  • Automatic detection of NPN and PNP transistors, N-channel and P-channel MOSFETs, diodes (including dual diodes), thyristors, transistors, resistors and capacitors.
  • The pin of the component is automatically tested and displayed on the LCD.
  • Higher test speed, valid component test is 2 seconds. (Except for larger capacitors, the measurement of large capacitors also takes a long time, and the measurement time of 1 minute is normal).
  • Automatic shutdown function can avoid unnecessary waste, save battery energy and improve battery life.
  • One-button operation automatically turns off the power.
  • The ATmega328 uses sleep mode to reduce power consumption when not in measurement.

Cautions:

  • Discharge the capacitors completely before you measure it, otherwise, it could damage your meter.
  • Considering the accuracy of testing, please replace batteries when battery power is low.
  • Brightness Adjustment: Keep pressing the power button and enter into the interface of contrast adjustment.
  • Error Correction: Please prepare your own necessities and refer to the following procedure.

 

We Customize Just for You!!

Tempero Systems offers many custom IoT electronic design services to help tailor our product to your exact needs. Whether you are looking for custom firmware, circuit board modifications, metal enclosures, or industrial color printing, we can help you with a wide variety of design services.


Product Reviews and FAQ's

Please login or register to ask a question. Thanks

Post Your Question

×

* All questions and comments are approved by a system administrator before re-posting to our FAQ product sections.