Load Cell Weight Sensor Module

Specifications:

• Rated Load: 1 / 5 / 10 / 20kg
• Rated Output: 1.0mV/V+-0.15mV/V
• Zero Output: +-0.1mV/V
• Creep: 0.03%F.S./30min
• Input End: Red+ power, Black- power
• Output End: Green+ signal, White- signal
• Recommended operating voltage: 3~12V DC
• Maximum operating voltage: 15V DC
• Input Impedance: 1115+-10%R
• Output Impedance: 1000+-10%R
• Protection class: IP6

• HX711 Electronic Load Cell Weighing Sensor
• Two selectable differential input channels;
• On-chip power supply regulator for load-cell and ADC analogue power supply.
• An on-chip oscillator requires no external component with an optional external crystal.
• Simple digital control and serial interface: pin-driven controls, no programming needed.
• Current consumption, including on-chip analog power supply regulator: normal operation < 1.5mA, power down < 1uA
• Selectable 10SPS or 80SPS output data rate
• Simultaneous 50 and 60-supply rejection
• Operation supply voltage range: 2.6 ~ 5.5V
• Operating Temperature Range:-20℃ ~ +85℃
• Size. 40 x 20mm

Package Includes:

• 1 / 2 / 3 / 5 / 10 / 20 KG Load Cell Weight Sensor Scale Weighing Pressure Arduino and or if you choose the HX711 Module. 

Development  Resources: Demo Codes, Schematics, Datasheets, Etc

Learn Electronics Quick, easy and to the point!

1. There may be slight size deviations due to manual measurement and different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photography lights, angles and display monitors.