MPPT 1-100w 5A DC 5-26v Solar Panel Regulator Module

MPPT 1-100w 5A DC 5-26v Solar Panel Regulator Module is suitable for 9V 12V 18V solar panels for batteries, nickel-cadmium, nickel hydrogen, lithium batteries (battery) charging, wind turbines, and solar street lamps.

Debugging method:

Step 1: Connect the solar cell. Do not take the bottle to be charged if the output voltage is not in step 2. Suppose there is no transfer of small output counterclockwise, slowly until the output voltage MPPT.
Step 2: counterclockwise transfer of small output voltage until the red and blue lights flash, then coarse output voltage to a full cut-off voltage
Step 3: Access the dead battery, and at the output string ammeter, monitor the charging current using the MPPT trimming potentiometer until it reaches its maximum.
Step 4: The access is full of batteries; if the blue light is clockwise, turn up the output voltage until the red light. Then, slowly transfer a small output voltage counterclockwise until only the blue lights are lit, and then use a multimeter to measure the correct cut-off voltage to avoid overcharging!

Transfer methods instead of using the power supply of solar energy:

Step 1: The power supply was adjusted with Solar MPPT voltage (such as 18V)
Step 2: The power supply connected to the input terminal does not take the battery to be charged if the output voltage is adjusted clockwise until there is no large MPPT voltage output. Then, slowly counterclockwise, until the transfer of small MPPT has the output voltage,
Step 3: anti-clockwise turn down the output voltage until the red and blue lights flash, then coarse output voltage to a full cut-off voltage
Step 4: If the access is just full of batteries, if the blue light is clockwise, turn up the output voltage until the red light. Then, slowly transfer a small output voltage counterclockwise until just blue lights up, and then use a multimeter to measure and determine the correct cut-off voltage to avoid overcharge!

Charge Management board features:

1. Solar cell maximum power point tracking, the output current is greater than the solar panel current, real ultra-efficient MPPT, support 8-28V, 100W solar energy within large current charging with a solar panel recommended that each module) multiple modules connected in parallel to expand the charging current
2. The output voltage can be adjusted, CC-CW automatic control (can support single or multi-lithium batteries or lithium iron phosphate or lead-acid batteries, high-power LED, etc.)
3. A complete battery charge management
4. PWM Switching Frequency: 300KHz

Measuring resistance, low dropout, perfect protection against reverse, reverse does not work, put an end to reverse damage to the charge sheet

Specifications:

• Colour: Red
• Module nature: with true MPPT solar maximum power point tracking function, fully automatic intelligent charging management, low power consumption
• Input voltage: DC 8-28V input DC voltage (no input AC)
• Output voltage: DC 5-26V step-less adjustable transmission
• Output current: 2A/5A
• Charging indicator: Yes.
• MPPT function: Yes
• PWM Switching Frequency: 300KHz
• Operating temperature: industrial grade (-40 ° C to +85 ° C)
• Load adjustment rate: ±1%
• Voltage regulation rate: ±0.5%
• Conversion efficiency: Max: 93% Peak: 95% Different lighting conditions are different.
• Charging mode: fully automatic intelligent three-stage charging mode. Self-tracking solar power size automatically adjusts the charging current.
• Charge Indicator: ast charging red light long and blue light flash alternately charged, full automatic stop
• No-load current: 3MA
• Input reverse connection protection: Yes.
• Output reverse flow protection: Yes.
• Wiring method: with terminal block
• Size: 6 * 3.5cm
• Weight: approx. 47g

Note: This product is suitable for 9V, 12V, 18V, 24V solar panels

Solar panel series and parallel calculator to easily find which common wiring configuration maximizes the power output of your solar panels. Solar Panel Series & Parallel Calculator

How to choose a solar panel :

This table shows the solar system configuration relationship between storage batteries and solar panels

Package includes: MPPT 1-100w 5A DC 5-26v Solar Panel Regulator Module

Check out our On Sale and Clearance Items 

Development  Resources: Demo Codes, Schematics, Datasheets, Etc

Robot Zero One 5A Lithium MPPT Solar Charger – Set-Up Instructions

Wiki: Solar cell panel

Resources dedicated to electronics design engineers.

     Hackaday serves up Fresh Hacks Every Day from around the Internet.

Instructables is a community for people who like to make things. Explore, share, and do your next project with us!

     Where the world builds software

    Raspberry Pi Foundation: What would you like to make today?

    Arduino‘s mission is to enable anyone to enhance their lives through accessible electronics and digital technologies.

     Wikipedia is a free online Encyclopedia created and edited by volunteers worldwide and hosted by the Wikimedia Foundation.

Notes:

1. There may be slight size deviations due to manual measurement and different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different Photography lights, angles, and display monitors.