* All questions and comments are approved by a system administrator before re-posting to our FAQ product sections.
$7.25 (AUD)
Sorry!... this product is currently out of stock please contact us for updates on availability. Or see below if we may have "discontiued" this product.MQ4 Methane Gas Sensor detects the concentration of methane gas in the air and outputs its reading as an analogue voltage. The concentration sensing range of 300 ppm to 10,000 ppm is suitable for leak detection The sensor can operate at temperatures from -10 to 50°C and consumes less than 150 mA at 5 V.
Calculate Shipping - shipping options and estimates can be found in your shopping cart.
MQ-4 Methane CNG Gas Sensor Module
MQ-4 Methane CNG Gas Sensor Module is for detecting Methane, CNG Gas Due to its high sensitivity and fast response time, measurements can be taken as soon as possible. The sensitivity of the sensor can be adjusted by using the potentiometer.
Sensor | Detects | Heater Voltage |
---|---|---|
MQ-2 | Methane, Butane, LPG, smoke | 5V |
MQ-3 | Alcohol, Ethanol, smoke | 5V |
MQ-4 | Methane, CNG Gas | 5V |
MQ-5 | Natural gas, LPG | 5V |
MQ-6 | LPG, butane gas | 5V |
MQ-7 | Carbon Monoxide | Alternating 5V and 1.4V |
MQ-8 | Hydrogen Gas | 5V |
MQ-9 | Carbon Monoxide, flammable gasses. | Alternating 5V and 1.4V |
MQ131 | Ozone | 6V |
MQ135 | Air Quality (Benzene, Alcohol, smoke) | 5V |
MQ136 | Hydrogen Sulfide gas | 5V |
MQ137 | Ammonia | 5V |
MQ138 | Benzene, Toluene, Alcohol, Acetone, Propane, Formaldehyde gas, Hydrogen | 5V |
MQ214 | Methane, Natural gas | 6V |
MQ216 | Natural gas, Coal gas | 5V |
MQ303A | Alcohol, Ethanol, smoke | 0.9V |
MQ306A | LPG, butane gas | 0.9V |
MQ307A | Carbon Monoxide | Alternating 0.2V and 0.9V. |
MQ309A | Carbon Monoxide, flammable gasses | Alternating 0.2V and 0.9V |
MG811 | Carbon Dioxide (CO2) | 6V |
AQ-104 | Air quality | – |
Can be used for home and factory gas leakage monitoring devices, suitable for liquefied petroleum gas, butane, propane, methane, smoke, ammonia, sulfide, benzene, etc.
Can be used in homes and factories leakage monitoring device suitable for the detection of natural gas, hydrogen, butane, propane, methane, smoke,etc.
Gas sensor sensitivity to alcohol can resist the interference of gasoline, smoke, water vapour. The sensor can detect a variety of alcohol concentration in the atmosphere
Can be used for on-site detection of motor vehicle drivers (breathalyzer), but also for detecting other places of ethanol vapour, alcohol detection range: detection range 10 ~ 1000ppm
MQ-4 Methane gas sensor of high sensitivity, propane, butane and has good sensitivity. The sensor can detect a variety of combustible gases, especially natural gas.
Can be used in homes and factories leakage monitoring device, suitable for the detection of liquefied petroleum gas, butane, propane, methane, smoke and the like.
Main Chip: LM393, ZYMQ-5 gas sensor for liquefied petroleum gas (LPG), natural gas, city gas, best sensitivity.
Can be used for LPG detection, natural gas, coal gas monitoring device suitable for home or industrial. Excellent resistance to alcohol, smoke interference ability.
MQ-6 gas sensor for propane, butane, LPG high sensitivity, natural gas and has good sensitivity. The sensor can detect a variety of combustible gas, suitable for a variety of applications.
Suitable for home or industrial on LPG (liquefied petroleum gas), butane, propane, LNG (liquefied natural gas) detection devices. Excellent resistance to ethanol vapour, mist interference.
High-low temperature cycling detection mode (1.5V heating) carbon monoxide detector, conductivity sensor with the increasing concentration of carbon monoxide gas in the air increases, high-temperature (5.0V heating) cleaning cryo-adsorption stray gases. Using a simple circuit to change the conductivity, the concentration of the gas is converted to the corresponding output signal. MQ-7 gas sensor has a high sensitivity for carbon monoxide, this sensor can detect a variety of gases containing carbon monoxide, is a low-cost sensor for a variety of applications.
Can be used for home and factory gas leakage monitoring devices, suitable for liquefied petroleum gas, butane, propane, methane, smoke, etc.
MQ-8 hydrogen gas sensor of high sensitivity monitoring of other hydrogen-containing gases.
Suitable for home or industrial hydrogen leak monitoring devices. Can not interfere with ethanol vapour, soot, carbon monoxide and other gases.
High-low temperature cycling detection mode (1.5V heating) detecting carbon monoxide sensor’s conductivity increases with the air of carbon monoxide gas concentration increases, spurious adsorption at high temperature (5.0V heat) detection of combustible gases methane, propane, and cryogenic cleaning gas. MQ-9 gas sensor for high carbon monoxide, methane, liquefied petroleum gas sensitivity, this sensor can detect a variety of carbon monoxide and combustible gas, is a low-cost sensor suitable for a variety of applications.
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angle and display monitor.
Other Related Products
Components Package Kit for Arduino A low-cost components starter kit which comprises the most commonly used resistor values, potentiometers, switches, LED’s and Header terminal strips
Weight | 0.0010 kg |
---|---|
Dimensions | 3.2 × 2.2 × 2.7 cm |
SKU | Product | Type | Download/View |
---|---|---|---|
OKY3328-1 | MQ-4 Methane CNG Gas Sensor Module - MQ-4 Data Sheet | Document | Download |
Tempero Systems offers many custom IoT electronic design services to help tailor our product to your exact needs. Whether you are looking for custom firmware, circuit board modifications, metal enclosures, or industrial color printing, we can help you with a wide variety of design services.
Please login or register to ask a question. Thanks
* All questions and comments are approved by a system administrator before re-posting to our FAQ product sections.