Workshop Package Kit for Arduino – 02
The Arduino Workshop Kit with the Arduino Uno controller board comes with a selection of all the components/parts necessary to participate in an introductory Arduino Workshop.
3 in stock
3 in stock
Pro Micro Leonardo – 5V/16MHz -micro-USB
Pro Micro Leonardo – 5V/16MHz -micro-USB
The Micro Leonardo – 5V/16MHz micro-USB is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity onboard and do away with a bulky external USB interface. It has an Arduino Leonardo bootloader in it. So you can just use it as a normal Arduino Leonardo board.
This tiny little board does all of the neat Arduino tricks that you’re familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 Dios as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favourite Arduino-compatible boards but this little guy can go just about anywhere. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you’re supplying unregulated power to the board, be sure to connect to the “RAW” pin on not VCC.
Reference for Arduino and reference to all matters
Notes:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angle and display monitor.
The Arduino Workshop Kit with the Arduino Uno controller board comes with a selection of all the components/parts necessary to participate in an introductory Arduino Workshop.
Weight | 0.06 kg |
---|---|
Dimensions | 4 × 5 × 1 cm |