This side-entry screw terminal block has a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many PCBs and prototyping boards. It has nine terminals for the stripped ends of 26 – 18 AWG wires and is rated for 150 V, 6 A.
$0.75 – $2.81
Screw Terminal Block 0.1″ (2.54 mm) Pitch, Side Entry have terminals that hold and release wires through the simple adjustment of a small screw, allowing you to make temporary connections to a PCB easily. Since each terminal has a single corresponding pin spaced every 0.1″ (2.54 mm), you can use these terminal blocks with prototyping boards and PCB
Available in 2,3,5 and 9 pin
For solid wire, stripping wire to the appointed length, then tightening with rated torque.
For stranded wire: stripping wire to the appointed length, mating with the corresponding type of ferrule, then tightening with rated torque.
The tightening process should be steady; you can’t use explosive force.
Note: These terminal blocks do not slide together like our stackable screw terminal blocks, and they do not fit next to each other on a 0.1″ grid, so you will need to get the exact size required for the application. Additionally, they do not work well in solderless breadboards (their pins are too short).
Development Resources: demo codes, schematics, datasheets, etc
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angle and display monitor.
Tempero Systems offers many custom IoT electronic design services to help tailor our product to your exact needs. Whether you are looking for custom firmware, circuit board modifications, metal enclosures, or industrial color printing, we can help you with a wide variety of design services.