* All questions and comments are approved by a system administrator before re-posting to our FAQ product sections.
$2.55 – $11.95 (AUD)
This side-entry screw terminal block has a pitch of 0.1″ (2.54 mm), and can be used as alternatives to standard 0.1″ male or female headers on many PCBs and prototyping boards. It has nine terminals for the stripped ends of 26 – 18 AWG wires and is rated for 150 V, 6 A.
18650- Battery Holder with Fly leads
$1.35 – $3.35 (AUD) Options
108 in 1 Screwdriver Set
$29.95 (AUD) Add to Cart
|4 in stock|
Screw Terminal Block 9 pin 0.1″ (2.54 mm) Pitch, Side Entry have terminals that hold and release wires through the simple adjustment of a small screw, allowing you to easily make temporary connections to a PCB. Since each terminal has a single corresponding pin spaced every 0.1″ (2.54 mm), you can use these terminal blocks with prototyping boards and PCB.
Strip wire to the appointed length for solid wire, then tighten with rated torque.
For stranded wire: stripping wire to the appointed length, mating with the corresponding ferrule type, then tightening with rated torque.
The tightening process should be steady; you can’t use explosive force.
Note: These terminal blocks do not slide together like our stackable screw terminal blocks, and they do not fit next to each other on a 0.1″ grid, so you will need to get the exact size required for the application. Additionally, they do not work well in solderless breadboards (their pins are too short).
Package List: Screw Terminal Block 9 pin
Instructables is a community for people who like to make things. Explore, share, and do your next project with us!
Raspberry Pi Foundation What would you like to make today?
Arduino’s mission is to enable anyone to enhance their lives through accessible electronics and digital technologies.
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angles and display monitors.
1 Pack, 5 Pack
Tempero Systems offers many custom IoT electronic design services to help tailor our product to your exact needs. Whether you are looking for custom firmware, circuit board modifications, metal enclosures, or industrial color printing, we can help you with a wide variety of design services.