Servo Motor SG-5010 – 180 degrees

• Power: 4.8V – 6V DC max (5V works well)
• Average Speed: 0.2sec/60degree (@ 4.8V), 0.16sec/60degree (@ 6V)
• Weight: 39g (1.37 oz)
• Torque: At 5V, 5.5kg-cm / 76oz-in, and at 6V 6.5kg-cm / 90oz-in.
• Size mm: (L x W x H) 40 x 20.0 x 38 mm
• Size in: (L x W x H) 1.60x.79×1.50
• Spline Count: 25
• Analog drive
• Nylon gears
• Dual Bearing
• Connector Type: JR
• Motor Type: 3-pole

This Servo Motor SG-5010  180 degrees can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gearbox. Comes with 3 horns, as shown. They aren’t the highest quality servo (which is why they are less expensive) and so are not suggested for hobby planes. To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE (see here for an example sketch). Position “0” (1.5ms pulse) is middle, “90” (~2ms pulse) is all the way to the right, “-90” (~1ms pulse) is all the way to the left.

Development  Resources: demo codes, schematics, datasheets, etc

Reference for Arduino and reference to all matters

Ardunio from Wikipedia

Resources:  Instructables Circuits

Scan Nearby Objects to Make 3d Model Using ARDUINO

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angle and display monitor.

Other Related Products

Workshop Package Kit for Arduino – 02

The Arduino Workshop Kit with the Arduino Uno controller board comes with a selection of all the components/parts necessary to participate in an introductory Arduino Workshop.

See Support Items