Workshop Package Kit for Arduino – 02
The Arduino Workshop Kit with the Arduino Uno controller board comes with a selection of all the components/parts necessary to participate in an introductory Arduino workshop.
Slide Switches SS-22F07-G6 2 Position (3 Pack)
Slide Switches SS-22F07-G6 2 Position (3 Pack)
Typically slider switches are used for simple on-off applications, sliding between Normally Open (NO) and Normally Closed (NC)
$1.95
10 in stock
Description
Additional information
Applications
Support & Utility
Q & A
Description.
Slide Switches SS-22F07-G6 2 Position (3 Pack)
- Used to control current flow in a circuit, and typically use a mechanical slider to switch a current on and off, by sliding between an open and closed state.
- Slide switches have a more obvious tactile shape this which allows the user to more confidently differentiate between on and off states.
Specification
Rating: 0.3A 30VDC
- Electrical Life: ≥ 10,000 Cycles,
- Unloading 15-18 cycles per min
- Contact Resistance: 10mΩ max. initial @2-4 VDC,100 mA
- Insulation Resistance: 1000mΩ min
- Dielectric strength: 1500VAC 1 minute
- Operating Temperature: -25℃~ +85℃
Development Resources: demo codes, schematics, datasheets, etc
Reference for Arduino and reference to all matters
Notes:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angle and display monitor.
Other Related Products
| Weight | 0.007 kg |
|---|---|
| Dimensions | 6 × 1 × .5 cm |
Product Applications
Slide Switches SS-22F07-G6 2 Position (3 Pack) Description.
Used to control current flow in a circuit, and typically use a mechanical slider to switch a current on and off, by sliding between an open and closed state. Well suited for controlling current flow in smaller circuits, it is very common to see slide switches used as a primary power switch in small, battery operated electrical devices.
Though they behave very similarly to push button switches, slide switches have a more obvious tactile shape, which allows the user to more confidently differentiate between on and off states.
The RS Range of slide switches accommodates voltage ratings between 4 v dc and 400 V ac, with contact resistances ranging from 10 milliohms to 10 ohms.
Q & A
Ask a question
There are no questions yet
Related Products
SS-12F17 PCB Mounted Miniature Vertical Slide Switch
$0.45 – $6.95
TVDP01 Tactile Switch 6mm*6mm*5mm
$0.35 – $5.95
SS-23E04 PCB Mounted Miniature Vertical Slide Switch
$0.45 – $6.95
