TTP223 Capacitive Touch Sensor Module (red)
This board is a quick demo board for capacitive touch sensing IC TTP223. You can use it to detect and switch on external units using an external relay
14 in stock
14 in stock
The TTP223 Capacitive Touch Sensor Module (red) is great for adding a capacitive touch key to your project instead of the old fashioned push buttons. This module features a low power consumption and a wide working voltage range.
An onboard LED will give a visual indication of when the sensor is triggered. When triggered, the module’s output will switch from its idle low state to high (default operation). Solder jumpers allow for reconfiguring its mode of operation to be either active low or toggle output.
Specifications:
- On-board TTP223 capacitive touch sensor IC
- Status indicator LED
- Working Voltage Range: 2 V to 5.5 V
- Operating current @VDD=3V, no-load, SLRFTB=1
- At low power mode, typical 1.5uA, maximum of 3.0uA
- At fast mode, typical 3.5uA, maximum of 7.0uA
- @VDD=3V, no-load, SLRFTB=0
- At low power mode, typical 2.0uA, maximum of 4.0uA
- At fast mode, typical 6.5uA, maximum of 13.0uA
- Sensitivity can adjust by the capacitance(0~50pF) outside
- The response time max about 60mS at fast mode, 220mS at low power mode @VDD=3V
- Have the maximum on-time 100sec by pad option(MOTB pin)
- PCB Size: 15 x 11 mm
- Positioning holes: two positioning holes M2 screws, pore diameter 2mm, making installation easy positioning module
- Control Interface: 3 pins (GND, VCC, OUT), GND is ground, VCC is the power supply.
- Colour: Red
Package included:
1 x TTP223 Capacitive Touch Sensor Module (Red)
Development Resources: demo codes, schematics, datasheets, etc
Instructables: Tutorial for TTP223 Touch Sensor Module
Notes:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angle and display monitor.
Weight | 0.010 kg |
---|---|
Dimensions | 2 × 1 × 1 cm |