WS2811 LED Driver

Description:

The WS2811 LED Driver is 3 output channels special for the LED driver circuit. Its internal includes an intelligent digital port data latch and signal to reshape the amplification drive circuit.

IC use a single NZR communication mode. After transmission for each chip, the signal to reduce by 24bit. IC adopt auto reshaping transmit technology, making the chip cascade number not limited to the signal transmission, only depending on the speed of signal transmission. The data latch of IC depends on the received 24bit data to produce different duty ratio signals at OUTR, OUTG, and OUTB ports.

IC sent PWM data that received justly to OUTR, OUTG, and OUTB port, after receiving a low voltage reset signal the time retain over 280μs

Features: 

• Apply to products working under 5V-12V.
• Programmable constant current led driver ic;
• RGB Current adjusting range is 16mA.
• Signal in series

Package included: 1x WS2811 LED Driver

Check out our On Sale and Clearance Items 

Development  Resources: demo codes, schematics, datasheets, etc

     Hackaday serves up Fresh Hacks Every Day from around the Internet.

Instructables is a community for people who like to make things. Explore, share, and do your next project with us!

     Where the world builds software

    Raspberry Pi Foundation What would you like to make today?

    Arduino‘s mission is to enable anyone to enhance their lives through accessible electronics and digital technologies.

Wikipedia is a free online encyclopedia created and edited by volunteers worldwide and hosted by the Wikimedia Foundation.

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angles and display monitors.