WS2812B Black and Mini addressable RGB LED

Description: 

The WS2812B (or “NeoPixel”) may look like a common 5050-sized (5x5mm) SMD LED, but there’s actually an integrated control circuit embedded inside there too. Sometimes you don’t need 10, maybe you need 50! If you are the person who needs that many then this is the perfect quantity for you. If you look really hard, you can see the tiny black chip hidden in there, along with minuscule gold wires connecting the chip to the LED. This LED is certainly more than meets the eye! The ‘B’ at the end of the WS2812 name denotes that these specific LEDs are equipped with and only require FOUR pins instead of SIX!

• WS2812B BLACK and Mini are addressable RGB LEDs that are extremely flexible, easy to use, and controlled separately.
• These LEDs are equipped with an integrated driver that allows users to control the colour and brightness of each LED independently.
• WS2812B Black and Mini, each pixel can have its own colour and brightness.
• Any two transmission distances, not more than 3 Meters, without adding any circuit.
• The three primary colours of each pixel can achieve a 256 level Grayscale, and to fulfil 16777216 colours full-colour display, its scan frequency is higher than 400Hz/s.
• Built-in Power-on reset and Power-off reset circuits.

Features: WS2812B-Black 

• 4-7 VDC: +5V input voltage (only 5V recommended!)
• Din: Input of data signal (signal coming from an Arduino, RPi, or other WS2812 (B) LED)
• The output of data signal (signal to another WS2812 (B) LED or unconnected if it is the last LED)
• Signal input voltage – 0.5V to V_CC + 0.5V
• Input capacitance – 15pF
• Signal supply current – 1uA
• When the refresh rate is 30fps, cascade numbers are not less than1024 points.
• Send data at speeds of 800Kbps
• Power:0.24W/PCS
• Package-Type: SMD5050
• One IC Control One LED WS2812

Features: WS2812B-MINI

• 4-7 VDC: +5V input voltage (only 5V recommended!)
• Din: Input of data signal (signal coming from an Arduino, RPi, or other WS2812 (B) LED)
• The output of data signal (signal to another WS2812 (B) LED or unconnected if it is the last LED)
• Signal input voltage – 0.5V to V_CC + 0.5V
• Input capacitance – 15pF
• Signal supply current – 1uA
• When the refresh rate is 30fps, cascade numbers are not less than1024 points.
• Send data at speeds of 800Kbps
• Power:0.24W/PCS
• Package-Type: SMD3535
• One IC Control One LED WS2812

Package included: your choice of WS2812B BLACK and Mini in the Quantity you have selected

Check out our On Sale and Clearance Items 

Development  Resources: demo codes, schematics, datasheets, etc

• Note: Complete technical details can be found in the WS2812B Datasheet linked Support Tab.

FastLED Animation Library:  Arduino

github.com:  Raspberry Pi.

     Hackaday serves up Fresh Hacks Every Day from around the Internet.

Instructables is a community for people who like to make things. Explore, share, and do your next project with us!

     Where the world builds software

    Raspberry Pi Foundation What would you like to make today?

    Arduino‘s mission is to enable anyone to enhance their lives through accessible electronics and digital technologies.

Wikipedia is a free online encyclopedia created and edited by volunteers worldwide and hosted by the Wikimedia Foundation.

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angles and display monitors.