.  . Components & Parts, LEDs, WS2812B Led Pixel . WS2812B Led Pixel Strip 1mt roll

WS2812B Led Pixel Strip 1mt roll

$9.95$12.95 (AUD)

This is a roll of addressable (WS2812B) RGB LEDs. Each LED has a built-in controller chip that allows you to daisy-chain the LEDs

Qty Discount
2 - 4 5%
5 - 9 8%
10 + 10%
SKU: N/A Categories: , ,


We Ship World Wide We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company.

Calculate Shipping - shipping options and estimates can be found in your shopping cart.

Features:

WS2812B Led Pixel Strip 1mt roll

Available: IP30,IP65,IP67 

  • Input voltage:DC5v;
  • Power: 60leds/m—-18 watt/meter
  • LED resource: WS2812B led (5050 SMD RGB LED with a built-in improved version of ws2811 ic)
  • LED: each LED is separately controlled
  • IC Type: improved version ws2812 IC(built inside the 5050 SMD  RGB led)
  • Of IC: (1 IC drives 1 led chip);
  • Pixels: 30/60/74/96/100/144/meter;
  • Greyscale: 256;
  • Bits/color:8-bits/colour;
  • FPCB Width: 60leds/m—-10mm
  • Protection rate:
  • IP30 Non-Waterproof
  • IP65 Waterproof in Epoxy Coating
  • IP67 Waterproof in Plastic Tube
  • Colours: Full-colour RGB, dream colour changing;
  • Cuttable: every LED is cuttable;
  • Package: in anti-static bag, IP30 IP65 with 3M adhesive tape on the back (IP67 without 3M adhesive)

Development  Resources: demo codes, schematics, datasheets, etc

A light-emitting diode (LED) is a semiconductor light source that emits light when a current flows through it. Electrons in the semiconductor recombine with electron holes, releasing energy in the form of photons. The colour of the light (corresponding to the energy of the photons) is determined by the energy required for electrons to cross the bandgap of the semiconductor. White light is obtained by using multiple semiconductors or a layer of light-emitting phosphor on the semiconductor device.

 

Appearing as practical electronic components in 1962, the earliest LEDs emitted low-intensity infrared (IR) light.  Infrared LEDs are used in remote-control circuits, such as those used with a wide variety of consumer electronics. The first visible-light LEDs were of low intensity and limited to red. Modern LEDs are available across the visible, ultraviolet (UV), and infrared wavelengths, with high light output.

 

Early LEDs were often used as indicator lamps, replacing small incandescent bulbs, and in seven-segment displays. Recent developments have produced high-output white light LEDs suitable for room and outdoor area lighting. LEDs have led to new displays and sensors, while their high switching rates are useful in advanced communications technology.

 

LEDs have many advantages over incandescent light sources, including lower energy consumption, longer lifetime, improved physical robustness, smaller size, and faster switching. LEDs are used in applications as diverse as aviation lighting, fairy lights, automotive headlamps, advertising, general lighting, traffic signals, camera flashes, lighted wallpaper, horticultural grow lights, and medical devices.

 

Unlike a laser, the light emitted from an LED is neither spectrally coherent nor even highly monochromatic. However, its spectrum is sufficiently narrow that it appears to the human eye as a pure (saturated) colour.  Also unlike most lasers, its radiation is not spatially coherent, so it cannot approach the very high brightness’s characteristic of lasers.

Reference for Arduino and reference to all matters WS2812B Led Pixel Strip 1mt roll

Ardunio from Wikipedia

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angle and display monitor.

Other Related Products

Workshop Package Kit for Arduino - 02
Workshop Package Kit for Arduino – 02

The Arduino Workshop Kit with the Arduino Uno controller board comes with a selection of all the components/parts necessary to participate in an introductory Arduino Workshop.

See Support Items

Weight N/A
Dimensions N/A
IP Rating

IP30 – Non-Waterproof, IP65 -Epoxy, IP67 – plastic cover

Product Applications

We Customize Just for You!!

Tempero Systems offers many custom IoT electronic design services to help tailor our product to your exact needs. Whether you are looking for custom firmware, circuit board modifications, metal enclosures, or industrial color printing, we can help you with a wide variety of design services.


Product Reviews and FAQ's

Please login or register to ask a question. Thanks

Post Your Question

×

* All questions and comments are approved by a system administrator before re-posting to our FAQ product sections.