WeMos DHT11 temperature and Humidity Sensor Shield

The DHT11 Shield is a digital temperature and humidity sensor utilising the DHT11 sensor. The temperature range is 0~60C (+/-2C) and the humidity range is 20-90%RH (+/-5%RH).

$9.95

9 in stock

Add to Wishlist
WeMos DHT11 temperature and Humidity
This item: WeMos DHT11 temperature and Humidity Sensor Shield

9 in stock

$9.95
$9.95
Pro Micro Atmega32U4 - 5V/16MHz Replace ATmega328 Pro Mini Leonardo USB Pro Micro Leonardo
$10.95
UNO+WiFi R3 ATmega328P+ESP8266 32Mb flash USB-TTL CH340G Micro-USB
$10.95
WeMos D1 v3.0
1 × WeMos D1 mini Pro ESP8266 (V3.0)

36 in stock

$7.15
Mega 2560 R3 Atmega16u2
1 × Mega 2560 R3 Atmega16u2

1 in stock

$22.95
Qty Discount
2 - 4 5%
5 - 9 6.5%
10 + 8%
SKU: TS-P359
Description
Additional information
Applications
Support & Utility
Q & A
Description:

The WeMos DHT11 Temperature and Humidity Sensor Shield utilising the DHT11 sensor. The temperature range is 0~60C (+/-2C) and the humidity range is 20-90%RH (+/-5%RH). 

WeMos note: The temperature and humidity data read from the sensor is the result of the last measurement (the sensor will make a new measurement after data is read from the sensor). To get real-time data, you need to read twice. It is not recommended to repeatedly read from the sensor, the reading interval should be more than 2 seconds to ensure accurate measurements.

Features: 
  • Temperature: 0~60°C (±2°C)
  • Humidity: 20-90%RH (±5%RH) 
Wemos D1 mini pins:
See the front of the module for the I2C address. Each module has two available addresses which use a solder bridge to select. By default, use the address without the bridge installed, this will work for most applications. If you need a different address than the default one, solder the 2 address bridge pins together and refer to the alternative address/section>.
D4 on the D1 mini should be connected to the Data Out pin on the DHT module.
  • Pin D1: SCL
  • Pin D2: SDA
Package Included: 1 x WeMos DHT11 Temperature and Humidity Sensor Shield, 2 x pin Male Header 8-pin, 2 x Short Female Headers, 2 x Long Female Headers.

Check out our On Sale and Clearance Items 

Development  Resources: demo codes, schematics, datasheets, etc

 

     Hackaday serves up Fresh Hacks Every Day from around the Internet.


Instructables is a community for people who like to make things. Explore, share, and do your next project with us!

 

     Where the world builds software

    Raspberry Pi Foundation What would you like to make today?

    Arduino‘s mission is to enable anyone to enhance their lives through accessible electronics and digital technologies.


Wikipedia is a free online encyclopedia created and edited by volunteers worldwide and hosted by the Wikimedia Foundation.

 

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angles and display monitors.

Weight 0.0015 kg
Dimensions 10 × 5 × 1.1 cm


Product Applications

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information: