Bronze Aluminum Dual Fans Cooling Case Raspberry Pi 4

This is a Bronze Aluminum Dual Fans Cooling Case Raspberry Pi 4 Computer Model B. It is a great raspberry pi 4 passive cooling case to help raspberry pi 4 board cool down. Also a Raspberry Pi 4 Heatsink Case (Raspberry Pi 4 Case) for good heat dissipation.

Features

• Anodised aluminium
• Heatsink fins
• Thermal pads
• Dual 5V fans
• Easy assembly
• Very quiet
• Made for the Raspberry Pi 4
• All ports, pins & connectors are accessible
• Hex bolts & Allen key included
• Ultra-thin design
• Easy to install
• Fast Heat dissipation
• Smooth and straight aluminium material
• All ports and slots of the case can match with Raspberry Pi 4 Model B perfectly.
• With the open case design, you don’t need to worry it will affect the wifi signal anymore.
• Reinforced aluminium material, lightweight and durable, long-lasting stainless.

Assembly

Assembly of your heatsink should be quick and easy. First and foremost, make sure your Raspberry Pi 4 is powered off and unplugged. 

Next, take a thermal thermal pad, peel off the protective covers and attach to the CPU of your Raspberry Pi. If you would like, you can attach thermal pads to the DDR4 RAM chip, however, it isn’t a necessity.

Finally, you will need to position the top half of the case with the correct orientation, while simultaneously positioning the bottom half underneath your Pi. Grab your hex screws and trusty hex key, secure your new Pi heatsink case in place. If after assembly there is a visible gap between the CPU and the heatsink, disassemble and use an additional thermal pad.

Connect the fan wire as shown below (the orientation of red & black will control which direction the fan blows. They can be reversed).

Note: 

• The metal case is conductive of both heat and electricity. Take care when building circuits not to short any components.
• As a conductor of heat, the case will get warm during use, though you’ll be hard-pressed to ever see an “over temperature” error.

Packing List

1x Raspberry Pi 4 Armor Case-Bronze 1x Screws Pack 1x Wrench 1x Female Header

Development Resources: demo codes, schematics, datasheets, etc

Passive Heatsink Cooling For The Raspberry Pi 4

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angles and display monitors.