Connector LED Board

The Connector LED Board allows for easy connection of larger wires to the I/O 24 module and also provide a buffered visual indication of the states of all the signals on a port.

The board also has provisions for either several pull up or a pull-down configuration of the port.
The connections to the I/O channels on the Connector / LED board are by screw terminals that will accept cables 0.5 – 2 mm
The connection between the I/O24 module and the Connector / LED board is via a 30 cm IDC connection cable. This cable is provided with the board.

BOARD FEATURES:

• Buffered Indication Blue LED for port changes
• Option of either using pull up or pull-down resistor on the I/O’s of the modules
• Screw Terminal Block connections for larger wire connections
• Easy connection by 0.1″ pitch 10-way box header to suit standard IDC connector
• RoHS

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angle and display monitor.