DC-DC boost conversion power 1.5 to 4.2v to 5v boost
This is the voltage boost conversion module, which must be used when using the following conditions: Input voltage cannot be greater than nominal voltage, otherwise, the module will burn out.
The input power must be greater than the output power, 1.5V 1.8V 2.5V 3V 3.3V 3.7V 4.2V to 5V
$4.15
6 in stock
This item: DC-DC boost conversion power 1.5 to 4.2v to 5v boost
6 in stock
$4.15
$4.15
Description
Additional information
Applications
Support & Utility
Q & A
DC-DC boost conversion power 1.5 to 4.2v to 5v boost, operating frequency 150KHZ, typical conversion efficiency 85%.
This small tiny circuit boosts the voltage level and provides the amplified stabilized 5V output. For the different input ranges, it consumes a different amount of current to produce a balanced output.
Voltage and current correspondence:
- Starting voltage 0.8V, output current 7MA
- 1-1.5V, output 5V 40-100MA
- 1.5-2V, output 5V 100-150MA
- 2-3V, output 5V 150-380MA
- Input more than 3V, output 5V 380-480MA
- Operating Frequency:150KHz
- Typical Conversion Efficiency:85%
-
Pin 2.54MM Spacing
-
Size: 11mm x 10.5mm x 7.5mm (very small)
-
Weight: approx. 1 g (very light)
This is a voltage boost converter module. When using it, be sure to observe the following conditions:
- Input voltage cannot be greater than the nominal voltage, otherwise, the module will burn out
- Input power must be greater than the output power, otherwise, the output voltage will be less than the nominal voltage
- The output load cannot be greater than the nominal load, otherwise, the output voltage will be less than the nominal voltage
Package including 1X DC-DC boost conversion power 1.5 to 4.2v to 5v boost
Development Resources: demo codes, schematics, datasheets, etc
Reference for Arduino and reference to all matters
Notes:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angles and display monitors.
Other Related Products
Li-ion Battery Charger Protection Module 3S 10A
Li-ion Battery Charger Protection Module 3S 10A Charger BMS Protection Board Module is a small PCB mounted Lithium Battery charger protection module
| Weight | .005 kg |
|---|---|
| Dimensions | 2 × 3 × 1 cm |
Product Applications
Battery-powered equipment Wireless Module, NRF24L01 CC1101 CC2500 etc. Development Board, FPGA/CPLD UNO MEGA2560 PRO MINI 8051 C8051 AVR STC etc
Camera, Video camera VCR PDA LED Lighting Wireless communication equipment MP3/MP4 player Audio equipment.
Q & A
Ask a question
There are no questions yet
Related Products
