PC817 4 Channel Optocoupler Module

PC817 4-Channel Optocoupler Isolation Board. Onboard with 4-Channel 817 are independent, so can achieve different voltage control at the same.

$8.95

8 in stock

Add to Wishlist
This item: PC817 4 Channel Optocoupler Module

8 in stock

$8.95
$8.95
AVRISP MKII USBASP
$4.95
AT24C256 Serial EEPROM IIC Module.
$4.95
Qty Discount
2 - 4 5%
5 - 9 6.5%
10 + 8%
SKU: TS-P276
Description
Additional information
Applications
Support & Utility
Q & A
PC817 4 Channel Optocoupler Module is used when the actual operation requires isolation control and voltage conversion.
It can realize 3.3V or 5V to control the interface of 3.6–24V voltage level. After the control terminal is turned on, the controlled terminal will also be turned on.
Photoelectric isolation has a strong anti-interference ability. Can drive big behind power triodes, MOS tubes, etc., where high voltage driving is required, can also directly drive low power 24V relays.
If it is a pulse signal, please note that the limit of 817 is below 4KHZ. If the control signal is greater than 4KHZ, please do not use this module, it will not work properly.
Through the jumper, the cap can achieve whether the output is high potential output or low output.
The 4th and 817 on the board are independent, which can realize simultaneous control of different voltages, etc.
Features:
  • PC817 4 Channel Optocoupler Module
  • The drive terminal signal voltage: 3.6-24V
  • The output voltage range: 3.6-30V  (output current depends on the specific situation, but the maximum is not 10MA, the total power is certain, the voltage and current are inversely proportional)
  • Board size: Length: 48mm;Width: 38mm; Long side hole distance: 42mm; Wide side hole distance: 32mm
Package Included:

1 x 817 Optocoupler 4 Channel Voltage Isolation Board

Development  Resources: demo codes, schematics, datasheets, etc

PC817 Adapter Module Optocoupler with Arduino Video Link

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods, and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angles, and display monitors.

Related Products 
ATmega16U2 Arduino UNO R3 ATmega328P
ATmega16U2 Arduino UNO R3 ATmega328P

Open circuit diagram of the original design, the development of software interface for free download, can also be in accordance with the requirements and they are modified, download the program is simple and convenient. Can use sensors, all kinds of electronic components connection (such as LED lights, buzzer, buttons, photo resistance, etc.), make all sorts of exciting work.

Weight .015 kg
Dimensions 4.8 × 3.8 × 4.2 cm


Product Applications

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information: