Solder Wire 0.5mm to 1.0mm -14g to 100G 63/37 rosin core solder

If you want to make a kit you’ll need some solder. This 0.1 lb (about 50 grams) spool is a good amount, not too much (like 1 lb spools) and not too little (like those little ‘pocket clip’ vials).

$3.25$9.95
Type
resetClear
Add to Wishlist
Solder Wire 0.5mm to 1.0mm -14g to 100G 63/37 rosin core solder
This item: Solder Wire 0.5mm to 1.0mm -14g to 100G 63/37 rosin core solder
$3.25$9.95
$3.25$9.95
0.5mm Lead Free 250g Roll Solder
$33.95
0.8mm Lead Free Roll Solder 250g.
$32.95
0.8mm Tube 15gm Lead Free Solder
$4.00
$32.95
Qty Discount
2 - 4 5%
5 - 9 6.5%
10 + 8%
SKU: N/A
Category:
Description
Additional information
Applications
Support & Utility
Q & A
Solder Wire 0.5mm to 1.0mm -14g to 100G 63/37 rosin core solder.

If you want to make a kit you’ll need some solder. This 0.1 lb (about 50 grams) spool is a good amount, not too much (like 1 lb spools) and not too little (like those little ‘pocket clip’ vials).

This spool of solder contains approximately 0.6mm / .02″ diameter in standard 60/40 formulation. This is not lead-free solder, so not for lead-free/RoHS shops. However, for kit builders, it’s a joy to use, much easier than lead-free and great for beginners. For flux, it contains a ‘no clean’ rosin core. This diameter solder is best for any SMT/fine-pitch work as it allows you to deposit small amounts of solder.

This is “60/40” leaded solder with 40% Pb (Lead), 59.5% Sn (Tin) and trace Ag (Silver) %0.015, Cu (Copper) %0.04. Sometimes this is referred to as [59.5/0.015/0.04]

Solder Wire 0.5mm to 1.0mm -14g to 100G 63/37 rosin core solder.

Features: Type A
  • 50g
  • 63/37 rosin core solder.
  • FLUX 2.0%.
  • Wire diameter:  0.5mm.
  • Melting point: 220-350 °C.
  • 30% tin

Features: Type B

  • 50G
  • 63/37 rosin core solder.
  • FLUX 2.0%.
  • Wire diameter:  0.5mm.
  • Melting point: 183°C.
  • 35% tin

Features: Type C

  • 50G
  • Brand: Hanwuyou
  • Tin: 60%
  • Lead 10%
  • Flux 1.5-2%
  • Wire diameter:  0.8mm.
Features: Type D
  • 100G
  • Brand: Huusoet
  • 63/37 rosin core solder.
  • Flux 2.2%
  • Wire diameter:  1mm.
Features: Type F
  • 14g Tube
  • Brand Kaina
  • 63/37 rosin core solder.
  • FLUX 2.0%.
  • Wire diameter:  0.8mm.
  • Melting point: 183°C.
  • 35% tin
Development  Resources: demo codes, schematics, datasheets, etc
Is lead-free solder any good?
No, lead in solder doesn’t pose more of a health risk to you when soldering. The vapour pressure of lead is so low that there just aren’t significant numbers of lead molecules in the air as a result of soldering. … This is made more dangerous by lead-free solder since the temperature required for a good joint is higher.

Tip Tinner High Strength 20gm compound revitalises and restores tips so they’re almost as good as new. It contains solder powder and non-corrosive flux, so it cleans and tins your tip at the same time. Supplied in a handy tin, it also has double-sided tape so you can stick the tin to your workbench or a soldering station.

Reference for Arduino and reference to all matters

Ardunio from Wikipedia

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angle and display monitor.

Other Related Products

Tip Tinner High Strength
Tip Tinner High Strength 20gm

When soldering tip plating has oxidised and the whole tip has turned black making the tip unusable

Weight 0.055 kg
Dimensions 5.5 × 5.5 × 3 cm
Type

Type A 0.5mm, Type B 0.5mm, Type C 0.8mm, Type D 1.0mm, Type F 0.8mm Tube



Product Applications

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information: