WeMos – D1 Mini NodeMcu Lua WIFI ESP8266 Development Board

An Arduino-based microcontroller as the module includes a built-in micro USB interface allowing the module to be programmed directly from the Arduino IDE with no additional hardware.

$7.95

7 in stock

Add to Wishlist
WeMos – D1 Mini NodeMcu Lua
This item: WeMos – D1 Mini NodeMcu Lua WIFI ESP8266 Development Board

7 in stock

$7.95
$7.95
ATmega16U2 Arduino UNO R3 ATmega328P
$14.35
Mega 2560 R3 Atmega16u2
1 × Mega 2560 R3 Atmega16u2

1 in stock

$22.95
UNO+WiFi R3 ATmega328P+ESP8266 32Mb flash USB-TTL CH340G Micro-USB
$24.65
DUE R3 Board SAM3X8E
1 × DUE R3 Board SAM3X8E

Out of stock

$36.95
Qty Discount
2 - 4 5%
5 - 9 6.5%
10 + 8%
SKU: TS-P737
Description
Additional information
Applications
Support & Utility
Q & A

WeMos – D1 Mini NodeMcu Lua turns the very popular ESP8266 wireless microcontroller into a fully-fledged development board. Programming the D1 mini is as simple as programming any other Arduino-based microcontroller. The module includes a built-in micro USB interface, allowing the module to be programmed directly from the Arduino IDE (which requires the ESP8266 support to be added via board manager) with no additional hardware.

Specifications:
  • Microcontroller: ESP-8266EX
  • 11 digital input/output pins, all pins have interrupt/PWM/I2C/one-wire supported (except D0)
  • USB ↔ Serial Converter CH340G
  • Clock Speed: 80MHz
  • One analogue input (3.2V max input)
  • a Micro USB connection
  • Compatible with Arduino, nodemcu, MicroPython
  • 4MB Flash
  • Compatible with MicroPython, Arduino, nodemcu
  • Note: All I/O pins have interrupt, PWM, I2C, and one-wire capability, except for D0

Pin Function ESP-8266:

  • TX: TXD
  • RX: RXD
  • A0: Analog input, max 3.3V input A0
  • D0: IO GPIO16
  • D1: IO, SCL GPIO5
  • D2: IO, SDA GPIO4
  • D3: IO, 10k Pull-up GPIO0
  • D4: IO, 10k Pull-up, BUILTIN_LED GPIO2
  • D5: IO, SCK GPIO14
  • D6: IO, MISO GPIO12
  • D7: IO, MOSI GPIO13
  • D8: IO, 10k Pull-down, SS GPIO15
  • G: Ground, GND
  • 5V: 5V
  • 3V3: 3.3V
  • RST: Reset, RST
Package included:
  • WeMos – D1 Mini NodeMcu Lua
  • Normal pins. (2)
  • Short female pin. (2)
  •  Long female pin. (2)

Check out our On Sale and Clearance Items 

Development  Resources: Demo Codes, Schematics, Datasheets, Etc

 

Tempero systems Hackaday     Hackaday serves up Fresh Hacks Every Day from around the Internet.

tempero systems-InstructablesInstructables is a community for people who like to make things. Explore, share, and do your next project with us!

Tempero Systems-Github     Where the world builds software

tempero systems-Raspberry Pi    Raspberry Pi Foundation What would you like to make today?

tempero systems-Arduino    Arduino‘s mission is to enable anyone to enhance their lives through accessible electronics and digital technologies.

tempero systems-Wikipedia
Wikipedia is a free online encyclopedia created and edited by volunteers worldwide and hosted by the Wikimedia Foundation.

 

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing lights, angles and display monitors.

 

Weight 0.0010 kg
Dimensions 3 × 4 × .5 cm


Product Applications

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information: