HX711 Electronic Load Cell Weighing Sensor 2 Channel 24-bit A/D Converter Module
The module uses 24-bit high-precision A / D converter chip hx711; it is designed for a high-precision electronic scale and designed with two analogue input channels, the internal programmable gain amplifier integrated multiplier 128..
94 in stock
94 in stock
HX711 Electronic Load Cell Weighing Sensor 2 Channel 24-bit A/D Converter Module is designed for high-precision electronic scale and designed with two analogue input channels, the internal programmable gain amplifier integrated multiplier 128. The input circuit can be configured to provide an electrical bridge, the bridge voltage (e.g., pressure, weight) sensor mode is an ideal high-precision, a low-cost sampling front-end module
Specification:
- Two selectable differential input channels;
- On-chip power supply regulator for load-cell and ADC analogue power supply.
- On-chip oscillator requiring no external component with optional external crystal.
- Simple digital control and serial interface: pin-driven controls, no programming needed.
- Current consumption including on-chip analog power supply regulator: normal operation < 1.5mA, power down < 1uA
- Selectable 10SPS or 80SPS output data rate
- Simultaneous 50 and 60Hz supply rejection
- Operation supply voltage range: 2.6 ~ 5.5V
- Operating Temperature Range:-20℃ ~ +85℃
- Size. 40 x 20mm
Package Includes:
1 x HX711 Electronic Load Cell Weighing Sensor 2 Channel 24-bit A/D
Development Resources: demo codes, schematics, datasheets, etc
Youtube: How to use HX711 with Four Load Cells
Notes
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angles and display monitors.
Weight | .004 kg |
---|---|
Dimensions | 4 × 2 × .5 cm |