lm393 SW-18010p Vibration Sensor Digital Analogue
It integrates a 4 pin connector which can be easily connected to a sensor shield with the jumper cable with headers included.
It integrates a 4 pin connector which can be easily connected to a sensor shield with the jumper cable with headers included.
DHT11 is a compound digital temperature and humidity sensor that outputs calibrated digital signals. Thanks to the dedicated digital module acquisition technology and temperature and humidity sensing technology applied to…
DHT11 detects water vapour by measuring the electrical resistance between two electrodes. The humidity sensing component is a moisture holding substrate with electrodes applied to the surface. When water vapour…
LM35 series are precision integrated-circuit temperature devices with an output voltage linearly proportional to the Centigrade temperature. The low-output impedance, linear output, and precise inherent calibration of the LM35 device…
Thermistors are one of the most accurate types of temperature sensors. OMEGA thermistors have an accuracy of ±0.1°C or ±0.2°C depending on the particular temperature sensor model. However, these elements…
The DS18B20 temperature probe is a one-wire digital temperature sensor. This means that it just requires one data line (and GND) to communicate with the Arduino.
Enables you to keep abreast of the ambient temperature around you, more importantly, If you have an idea you can also customize your own use DIY a thermometer, put it…
This module is sensitive to the flame but also can detect ordinary light. Usually used as a flame alarm. Onboard, the digital output interface can be directly connected with the…
This shield allows an Arduino to Establish a wired Ethernet connection to a network and is compatible with Uno, Mega and boards with compatible I/O pins.