2S 5A BMS HX-2S-01 Li-ion Battery Protection Module

2S 5A BMS HX-2S-01 Li-ion Battery Protection Module is a small PCB-mounted Lithium Battery charger protection module. This small and smart BMS module has features like Short circuits, Overcharge, Over-discharge, and Overcurrent protection.

It is straightforward to install and convenient for all your DIY portable projects.

 HX-2S-01  has a Built-in three-stage over-current detection circuit (over-current 1, over-current 2, or load short circuit). MOS transistors can control the battery charge and discharge.

Therefore, a BMS may also feature a precharge system, which allows a safe way to connect the battery to different loads and eliminates excessive inrush currents to load capacitors.

Specifications:

• Short circuit protection
• Overcharge protection
• Over-discharge protection
• Overcurrent protection
• Overcharge Detection Voltage: 4.25-4.35V±0.05V
• Over-Discharge Detection Voltage: 2.3-3.0V±0.05V
• Charging Voltage: 7.4-9V
• Maximum Working Current: 5A
• Instantaneous Current: 7A
• Operating Temperature: -40-50℃
• Static current: less than 10uA
• Internal Resistance: Less than 100m Ω
• Size: Approx.41x8x2.2mm
  Battery Setup:
• B+ B-: The interface of the battery core
• P+ P-: The connector of the battery board
• BM: The connection point between the batteries
• B+: Battery V+ Positive
• B-: Battery V- Negative
• P+: Output / Charging V+
• P-: Output / Charging V-

Package Includes:

• 2S 5A BMS HX-2S-01 Li-ion Battery Protection Module

Development  Resources: Demo Codes, Schematics, Datasheets, Etc

1. There may be slight size deviations due to manual measurement and different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photography lights, angles and display monitors.