MG90S 180 degrees High Torque Metal Gear Micro Servo

MG90S High Torque Metal Gear Micro Servo are good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. It comes with a 3 horns (arms) and hardware.

$14.95

19 in stock

Add to Wishlist
Qty Discount
2 - 4 5%
5 - 9 6.5%
10 + 8%
SKU: OKY8006
Description
Additional information
Applications
Support & Utility
Q & A

MG90S 180 degrees High Torque Metal Gear Micro Servo. The tiny little servo can rotate approximately 90 Degree Micro Servo (45 in each direction) and works just like the standard kinds you’re used to but smaller. You can use any servo code, hardware or library to control these servos. It is suitable for beginners who want to make stuff move without building a motor controller with feedback & gearbox, especially since it will fit in small places. Of course, it is not nearly as strong as a standard servo.

SPECIFICATION
  • Size : 22.8 x 12.2 x 28.5 mm
  • Voltage : 4.8V to 6V DC
  • Weight: 16 grams
  • Speed : 0.1 sec/60  degrees (at 4.8V), 0.08 sec/60 degrees (at 6.0V)
  • Stall Torque : At 4.8V: 2.1 kg-cm / 25 oz-in. At 6.0V: 2.4 kg-cm / 30.5 oz-in
  • Spline Count: 20
  • Wiring:
    • Brown = GND
    • RED = 5V
    • Orange = Signal

Note: that the default servo pulse widths (usually 1ms to 2ms) may not give you a full 180 degrees of motion. In that case, check if you can set your servo controller to custom pulse lengths and try 0.75ms to 2.25ms. You can try shorter/longer pulses but be aware that if you go too far, you could break your servo

PARTS LIST:
  • MG90S 180 Degree Micro Servo  x1
  • Package includes gear horns and screws

Development  Resources: demo codes, schematic, datasheets, etc

Micro Servo with Arduino

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angle and display monitor.

 

SG90S 180 Degree Micro Servo

 

Weight 0.017 kg
Dimensions 4.5 × 4.5 × 1.2 cm


Product Applications

  • Used as actuators in many robots like Biped Robot, Hexapod, robotic arm etc..
  • Commonly used for steering system in RC toys
  • Robots where position control is required without feedback
  • Less weight hence used in multi DOF robots like humanoid robots

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information: