* All questions and comments are approved by a system administrator before re-posting to our FAQ product sections.
The I/O 24 Relay Output Board is an accessory board for our IO24 range of products. It can be connected to IO port of the modules to provide 8 Isolated relay contact outputs suitable for a variety of loads.
DIN Rail Mounting Clips, Narrow Plastic
$1.95 – $2.35 (AUD) Options
DC Y Splitter Cables 5.5 x 2.1mm female
$2.95 – $4.10 (AUD) Options
The Relay Board allows the implementation of much higher voltages and currents to be controlled from a single port on the existing I/O 24 Range.
Tempero I/O 24 Range consists of Ether I/O 24 R, Ether I/O 24 DIP R, USB I/O 24 R and the USB I/O 24 DIP R
The Relay board consists of eight Panasonic JW series 12v Coil relays with both normally open and normally closed contacts. The relay coils are powered from an external 12V DC power supply capable of producing at least 700mA (each relay consumes about 80mA when active). The relay coils are controlled using the ULN2803 via the I/O port of the module.
The board has been designed to a 72mm standard width so that it can easily be mounted in DIN rail mounting modules swell Board has been updated with 3 Extra Din Rail Mounts
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angle and display monitor.
|Dimensions||7.7 × 16 × 2.6 cm|
Tempero Systems offers many custom IoT electronic design services to help tailor our product to your exact needs. Whether you are looking for custom firmware, circuit board modifications, metal enclosures, or industrial color printing, we can help you with a wide variety of design services.