Workshop Package Kit for Arduino – 02
The Arduino Workshop Kit with the Arduino Uno controller board selects all the components/parts necessary to participate in an introductory Arduino workshop.
WS2812B 5-metre roll has 60 LEDs per metre on a white coloured strip
This is a roll of addressable (WS2812B) RGB LEDs. Each LED has a built-in controller chip that allows you to daisy-chain the LEDs and control them individually
WS2812B Led Pixel 5mt 60LED/Mt Strip Roll each LED has a built-in controller chip that allows you to daisy-chain the LEDs and control them individually – all from a single GPIO! The constant-current driver in each LED ensures that colour remains consistent, even if supply voltage varies slightly from the optimal 5V.
The LEDs are factory-calibrated to ensure you have consistent colours along your strip. The strip is weather-sealed in a flexible plastic jacket (easily removed, if desired) and terminated at each end with a 3-pin plug and two additional power leads if a high current is required.
Long strips can require a lot of currents! Make sure you’re using a power supply that is capable of running your project. We’ve listed the maximum current that these LEDs consume (full-brightness white), but the current required is usually a lot lower for a typical, colourful display. If you decide to go with a smaller power supply, experiment with the strip length you need to determine its actual, current requirements.
1 x WS2812B Led Pixel 5mt 60LED/Mt Strip Roll
Notes:
1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angles and display monitors.
The Arduino Workshop Kit with the Arduino Uno controller board selects all the components/parts necessary to participate in an introductory Arduino workshop.
Weight | N/A |
---|---|
Dimensions | N/A |
IP Rating | IP30 – Non-Waterproof, IP65 -Epoxy, IP67 – plastic cover |