.  . 2-pin Lithium-ion polymer, Power Control . 1260103 Lithium ion polymer Battery (LiPo) (3.7V 10000mAh)

1260103 Lithium ion polymer Battery (LiPo) (3.7V 10000mAh)

$49.35 (AUD)

The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry. Because they have a genuine JST connector, not a knock-off, the cable won’t snag or get stuck in a matching JST jack.

NOTICE: This item can only be shipped to Australian Addresses. Overseas Shipping not available.
Due to Australia Post Dangerous and prohibited goods Guidelines, These LiPo can only be sent Via Road.

24 in stock

Qty Discount
2 - 4 5%
5 - 9 8%
10 + 10%
SKU: TS-B023 Categories: ,


We Ship World Wide We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company. We are an Australian owned and Based Company.

Calculate Shipping - shipping options and estimates can be found in your shopping cart.

Features

1260103 Lithium-ion polymer Battery (LiPo) (3.7V 10000mAh)

Model series Info  xx60103   XX = Thickness, 60= Width, 103 = length + or -5%

Lithium-ion polymer (also known as ‘lipo’ ) batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 10000mAh for a total of about 37Wh. If you need a larger (or smaller!) battery, we have a large range of Lithium-ion polymer batteries.

 

Model 361643 1260103
Battery Chemical Composition Lithium-Ion
Nominal Voltage 3.7v
Nominal Capacity 10000mAh
Battery Watt Hour Rating (Required for Lithium Batteries) 37Wh
Max charge Current 1C
Cut-off Voltage 4.2V
Standard Charging method 0.5C CC(constant current)charge to 4.2V,then CV(constant voltage 4.2V) charge till charge current decline to ≤0.01C
Max discharge current 1C
Cut-off Voltage 3.0V
Standard Discharging method Constant current 0.2 C end voltage 2.75V.
O.C.V ≥3.85V
Connection Type 2-pin JST-PH
Dimension Thickness x Width x Height 10.8*59.8*101.2 mm
Weight 148 Grams
Cycle Life Over 500 times
Features ⋅low self-discharge⋅ no memory effects⋅ anti-over charger, short-circuit production (with PCM)
Operating Environment Charging:0°C~45°C;65±20RH Discharging: 10°C~60°C;65±20RH
Storage temperature -5℃~35℃
Charging Attention The charging current and charging voltage should be less than specified in the specification. The charger shall be designed to comply with the specification.
Dangerous Road Freight NO
Dangerous Air Freight YES

 

What is the difference between LiPo and Li-ion battery?

The most significant difference between lithium-ion and lithium-polymer batteries is the chemical electrolyte between their positive and negative electrodes. Lithium ion batteries: They have high energy density and cost less than lithium polymer. … However, their cost is high (30% average) as compared to lithium-ion.

How do LiPo batteries work?

The LVC detects the voltage of the battery and divides that voltage by the cell count of the battery. So it would see a fully charged 2S LiPo as 8.4V, or 4.2V per cell. … The LVC works to cut off the motor of the vehicle (or in some cases, pulse the motor) to alert you to a nearly-depleted battery pack.

What is the advantage of LiPo batteries?

LiPo batteries may also power the next generation of electric vehicles. The main advantages of LiPo battery cells are that they have about four times the energy of density of nickel-cadmium or nickel-metal hydride batteries. LiPo batteries are very lightweight and pliable and can be made to almost any size or shape.

Advantages

  • High energy density – potential for yet higher capacities.
  • Does not need prolonged priming when new. One regular charge is all that’s needed.
  • Relatively low self-discharge – self-discharge is less than half that of nickel-based batteries.
  • Low Maintenance – no periodic discharge is needed; there is no memory.
  • Speciality cells can provide very high current to applications such as power tools.

Development  Resources: demo codes, schematics, datasheets, etc

Reference for Stackable Header Arduino shields Pins Starter Kit

Pin header from Wikipedia

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angle and display monitor.

Other Related Products

UNO R3 Proto Screw Shield V3.0

The terminal expansion board extends the controller out of the terminal. And the user can also stack on top. Plus other expansion boards. Let your project get rid of the bounds…

See Support Items

Weight 0.155 kg
Dimensions 10.5 × 6.1 × 1.2 cm

Product Applications

We Customize Just for You!!

Tempero Systems offers many custom IoT electronic design services to help tailor our product to your exact needs. Whether you are looking for custom firmware, circuit board modifications, metal enclosures, or industrial color printing, we can help you with a wide variety of design services.


Our senior engineers provide you correct power solution and design for applications according to your products. Our customers are from all over the world. We welcome your contact.

Product Reviews and FAQ's

Please login or register to ask a question. Thanks

Post Your Question

×

* All questions and comments are approved by a system administrator before re-posting to our FAQ product sections.