ESP32 S3 N8R8 DevKitC-1 8MB Flash 8MB PSRAM

ESP32 S3 N8R8 DevKitC-1 8MB Flash 8MB PSRAM 2 x USB C  is assembled with an original ESP32-S3-WROOM-1 module from Espressif, with 8MB Flash and 8MB PSRAM (ESP32-S3-WROOM-1-N8R8).

PLEASE NOTE: The pin headers are yellow(as shown in photos) or can change due to supply

It is a general-purpose Wi-Fi + Bluetooth® LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. I/O pins on the module are broken out to the pin headers on both sides of this board for easy interfacing.

The ESP32-S3 is a dual-core XTensa LX7 MCU capable of running at 240 MHz. Apart from its 512 KB of internal SRAM, it has integrated 2.4 GHz, 802.11 b/g/n Wi-Fi, and Bluetooth 5 (LE) connectivity, providing long-range support.

ESP32 S3 N8R8 DevKitC-1 has 45 programmable GPIOs and supports a rich set of peripherals. ESP32-S3 supports larger, high-speed octal SPI flash and PSRAM with configurable data and instruction cache.

Connected to IO38 is an RGB WS2812 LED with Red, Green, and Blue LEDs that are individually addressable. ESP32-S3 is equipped with 2 USB Type C connectors. One is utilized for powering the board, flashing applications to the chip, and facilitating communication via the onboard USB-to-UART bridge.

The ESP32-S3 full-speed USB OTG interface, compliant with the USB 1.1 Specification, is connected to the second USB connector.

Specifications: ESP32 S3 N8R2 DevKitC-1 8MB Flash 8MB PSRAM

• XTensa dual-core 32-bit LX7 CPU, frequency up to 240MHz
• 2.4 GHz Wi-Fi, EEE 802.11 b/g/n-compliant
• Bluetooth, LE: Bluetooth 5, Bluetooth mesh
• 8 MB (64Mbit) SPI Flash
• 384 KB ROM
• 512 KB SRAM
• 8 MB SPI PSRAM
• 16 KB SRAM in RTC
• Communication Interfaces
• 2 x I2C
• 2 x I2S
• 4 x SPI
• 3 x UART
• 1 x USB OTG
• Security
• 4096 bit OTP
• AES, SHA, RSA, ECC and RNG
• Secure boot, Flash encryption, Digital signature, HMAC module
• Dual Type-C USB connectors
• Reset and User/Firmware buttons
• RGB WS2812 User LED
• Power LED
• Virtual USB port provided by CP2102 for debugging and firmware upgrade
• Supply Voltage: 5V via USB
• Circuit Voltage: 3.0 to 3.6V Circuit Operation
• Dimensions: 50.1 x 13mm

Package includes: ESP32 S3 WROOM 1 N8R8 

Check out our On Sale and Clearance Items 

Development  Resources: Demo Codes, Schematics, Datasheets, Etc

     Hackaday serves up Fresh Hacks Every Day from around the Internet.

Instructables is a community for people who like to make things. Explore, share, and do your next project with us!

     Where the world builds software

    Raspberry Pi Foundation: What would you like to make today?

    Arduino‘s mission is to enable anyone to enhance their lives through accessible electronics and digital technologies.

     Wikipedia is a free online Encyclopedia created and edited by volunteers worldwide and hosted by the Wikimedia Foundation.

Notes:

1. There may be slight size Deviations due to manual measurement, different Measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different Photographing lights, angles and display monitors.