ACS712 Current Sensor 5A-20A-30A

The ACS712 is a fully integrated, hall effect-based linear current sensor with 2.1kVRMS voltage isolation and an integrated low-resistance current conductor.

$6.25

5 in stock

Model
resetClear
Add to Wishlist
ACS712 Current Sensor 20A
This item: ACS712 Current Sensor 5A-20A-30A

5 in stock

$6.25
$6.25
1 × INA219 I2C Bi-directional

10 in stock

$6.25
INA3221 Triple-Channel I2C SMBUS Current Power Supply Voltage Monitor Sensor Modulepply Voltage Monitor Sensor Module
$7.95
USB Load Resistor
$6.95
Max471 Voltage Current Sensor Voltage Load Detection
$6.75
Qty Discount
2 - 4 5%
5 - 9 6.5%
10 + 8%
SKU: N/A
Description
Additional information
Applications
Support & Utility
Q & A
Description:

ACS712 Current Sensor 5A-20A-30A is a Fully Integrated, Hall Effect-Based Linear AC/DC Current Sensor with a 30A rating. Current sensors are used to monitor the amount of power a circuit consumes. This current sensor module can handle AC or DC currents up to 5A, 20A and 30A modules. A single analogue output signal connects to your microcontroller to provide the sensor readings

The voltage of the VOUT pin indicates the current. Each 100mV indicates 1A of current. Therefore, 300mA would mean that 3A of current is flowing through the connectors.

Here’s how the ACS712 work:

  • Current flows through the onboard hall sensor circuit in its IC
  • The hall effect sensor detects the incoming current through its magnetic field generation
  • Once detected, the hall effect sensor generates a voltage proportional to its magnetic field that’s then used to measure the amount of current
Features: 
  • Low-noise analogue signal path.
  • 5µs output rise time in response to step input current.
  • 50 kHz bandwidth.
  • Total output error is 1.5% at TA= 25°C and 4% at –40°C to 85°C.
  • Small footprint, low-profile SOIC8 package.
  • 1.2 mΩ internal conductor resistance.
  • 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
  • 5.0 V, single-supply operation.
  • 66 to 185 mV/A output sensitivity.
  • The output ratio is 66mV/A.
  • Output voltage proportional to AC or DC currents.
  • Factory-trimmed for accuracy.
  • Extremely stable output offset voltage.
  • Nearly zero magnetic hysteresis
  • Working Current: 10mA.
  • Onboard power indicator
  • PCB board size: 31 (mm) x13 (mm)

Package included: 1x ACS712 Current Sensor 5A-20A-30A

Check out our On Sale and Clearance Items 

Development  Resources: demo codes, schematics, datasheets, etc

Youtube:  Using the ACS712 Hall Effect Current Sensor Module

 

     Hackaday serves up Fresh Hacks Every Day from around the Internet.


Instructables is a community for people who like to make things. Explore, share, and do your next project with us!

 

     Where the world builds software

    Raspberry Pi Foundation What would you like to make today?

    Arduino‘s mission is to enable anyone to enhance their lives through accessible electronics and digital technologies.


Wikipedia is a free online encyclopedia created and edited by volunteers worldwide and hosted by the Wikimedia Foundation.

 

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angles and display monitors.

Weight 0.005 kg
Dimensions 1 × 1 × 3 cm
Model

20A, 30A, 5A



Product Applications

  • Motor speed control in motor control circuits
  • Electrical load detection and management
  • Switched-mode power supplies (SMPS)
  • Protection for over-current

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information: