Ether IO24 TCP

The Ether IO24 TCP is an integrated, micro‐controller based network interface board with 24 digital user I/O lines. Ether IO24 TCP firmware and hardware enable your devices or other modules to be connected to a generic Ethernet network and controlled using commands sent over the network via either TCP or UDP.

Each of the Ether IO24 TCP User I/O lines operates at 5V DC maximum levels and can be independently programmed, as an Input whose state can be remotely sensed via another network device, an Input whose state is internally checked and transmitted when a change occurs, or an Output whose state can be remotely controlled by another networked device.

Features:

• On‐board Web Interface to configure and control the board
• Supports TCP and UDP Commands, ARP, BOOTP, DHCP, ICMP, HTTP
• 24 independently programmable signal lines with programmable pull‐ups per line
• 3 independently controlled SPI and I2C Communication Ports
• Advanced configuration allows the modules to automatically scan the input ports and transmit changes directly to another ETHER I/O 24 module without host connection or to any internet port by router connection
• Onboard EEPROM allows all ports to power up in a user-programmable state
• Programmable Fixed IP or Dynamic IP assignment from a DHCP server
• Can be connected to a wireless network gateway or access point for wireless operation
• Easy connection to the IO port via a 10‐way box header that suits a standard IDC connector.
• 72mm Standard width for DIN Rail Modules
• Integrated Switch Mode Voltage Regulator allows power from any 8-32V DC Power source.

Embedded Java Programming and Configuration Interface.

Note: ENABLING THE JAVA APPLET ON INTERNET EXPLORER 10 UNDER WINDOWS 10

           Java SE 8 Archive Downloads

• Configuration and control of all settings are achieved using the onboard Web-based Java Application.
• Java Application is compatible with any Java-enabled Web Browser
• Password Protection of all Java Application functions

Layout and Mechanicals