0.96 Inch Blue I2C OLED LCD Module 4pin

0.96 Inch Blue I2C IIC OLED LCD Module 4pin

Works without a backlight in a dark environment

$9.95

12 in stock


Recommended and Related Products.

310pc 2.54mm Header Connector Kit
$14.95 (AUD) Add to Cart
1 in stock
30 Values 300pcs Ceramic Capacitor 2pf-0.1UF Assortment Kit
$4.95 (AUD) Add to Cart
0 in stock


Add to Wishlist
This item: 0.96 Inch Blue I2C OLED LCD Module 4pin

12 in stock

$9.95
$9.95
Nextion NX4024T032 3.2 inch
1 × Nextion NX4024T032 3.2 inch

Out of stock

$55.95
Nextion NX8048T050 5 inch
1 × Nextion NX8048T050 5 inch

Out of stock

$119.95
1.8 inch TFT LCD Module LCD Screen SPI Serial 51 Resolution 128 x 160
$12.95
Nextion NX3224T028 2.8 inch
1 × Nextion NX3224T028 2.8 inch

Out of stock

$49.95
Qty Discount
4 - 9 5%
10 + 8%
SKU: TS-S011
Description
Additional information
Applications
Support & Utility
Q & A

0.96 Inch Blue I2C OLED LCD Module 4pin is an organic light-emitting diode (OLED or organic LED). Also known as organic electroluminescent (organic EL) diode, it is a light-emitting diode (LED) in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current. This organic layer is situated between two electrodes, and at least one of these electrodes is transparent.

Features :
  • Driver IC: SSD1306
  • Size: 0.91 inch OLED
  • Resolution: 128 x 64 IIC interface
  • Display Color: White / Blue / Yellow and Blue
  • Size :27.0MM x 27.0MM x 4.1MM
  • Visual Angle: >160°
  • Input Voltage: 3.3V – 6V
  • Compatible I/O Level: 3.3V, 5V
Pin Description:
  •   GND: Power Ground
  •   VCC: Power + ( DC 3.3 -5v )
  •   SCL: Clock Line
  •   SDA: Data Link
Development  Resources: demo codes, schematics, datasheets, etc.

https://en.wikipedia.org/wiki/OLED 

  • The OLED display is higher compared to that of LCD. 0.96 Inch Blue I2C OLED LCD Module 4pin works without a backlight in a dark environment. The Driver chip of this OLED is SSD1306, which is compatible with IIC or SPI communication. So this module can be controlled by SPI or I2C.
  • There are two resistors at the back of the module and a sick-screen to remind you how to set the communication mode. The default mode is 4-wires SPI mode.
  • Except for the VCC and GND, four wires would be needed when using four wires SPI mode.
  • You can also set it to the I2C mode, where two control wires are needed.
  • There is also a simple switch-cap charge pump that turns 5v into a high voltage drive for the OLEDs, making this module the easiest way to get an OLED into your project.

Notes:

1. There may be slight size deviations due to manual measurement, different measuring methods and tools.
2. The picture may not reflect the actual colour of the item because of different photographing light, angles and display monitor.

 

Weight 0.030 kg
Dimensions 3 × 3 × 1 cm


Product Applications

OLEDs are used to create digital displays in devices such as television screens, computer monitors, portable systems such as smartphones, handheld game consoles and PDAs.

A major area of research is the development of white OLED devices for use in solid-state lighting applications.

Q & A

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your answer. Please report it to the website administrator. Additional information: